Skip to main content

Spring Rate & Ride Frequency Calculator

Compare ride frequency and wheel rate from spring rate, sprung mass per wheel and motion ratio. Calculate the spring rate for a comparison frequency.

SETTINGS

Adjust inputs

Spring rate and wheel conditions

View results

Updating…
Sprung-mass ride frequency (Hz)2.57
Wheel rate (N/mm)78.45
Spring rate for target frequency (kgf/mm)4.83

Spring rate and ride frequency

Sprung mass and motion ratio are held constant. Input changes update the curve, scale and comparison markers.

Sprung mass 300.0 kg / motion ratio 1.00

0.00 0.00 1.25 2.88 2.50 5.75 3.75 8.63 5.00 11.50 Ride frequency (Hz) Spring rate (kgf/mm) Current:8.00 kgf/mm、2.57 Hz Comparison:10.00 kgf/mm、2.88 Hz Target:4.83 kgf/mm、2.00 Hz
Chart comparison values
ConditionSpring rate
(kgf/mm)
Ride Frequency
(Hz)
○ Current8.002.57
□ Comparison10.002.88
◇ Target4.832.00

The target is a comparison, not a recommendation. This plot does not reproduce actual vehicle motion or ride comfort.

Compare sprung mass per wheel and spring stiffness

Sprung mass is the mass supported by the spring at one wheel: corner mass minus unsprung mass such as the wheel and tyre. Do not simply divide total vehicle mass by four.

Motion ratio here means wheel travel ÷ spring compression. Invert a reference that uses the opposite definition. Tyre stiffness and damping are excluded; the model does not reproduce actual vehicle motion or comfort.

Initial values and target frequency are comparison examples. A calculated rate does not establish product suitability, ride comfort or fitment.

All calculation results 6 items
Sprung-mass ride frequency (Hz)
2.574
Wheel rate (N/mm)
78.453
Spring rate for target frequency (kgf/mm)
4.831
Spring rate for target frequency (N/mm)
47.374
Comparison spring ride frequency (Hz)
2.878
Static deflection at the wheel (mm)
37.500
Save and share these calculation inputs

Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.

Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.

Method and assumptions

Formula and units
Wheel rate kw = spring rate ks / motion ratio². Ride frequency f = √(kw × 1000 / sprung mass) / (2π). Rates are N/mm, mass is kg and frequency is Hz. 1 kgf/mm = 9.80665 N/mm. Inverse: ks = (2πf)² × mass / 1000 × motion ratio².
Mass and motion ratio
Use measured corner mass minus unsprung mass. Vehicle mass divided by four is not filled automatically. Motion ratio is vertical wheel travel divided by actual spring compression near static ride height. Use a measured ratio including installation-angle effects; do not apply angle correction twice.
Model limits
This single-degree-of-freedom model uses a linear spring and constant motion ratio. It excludes damping, tyre stiffness, anti-roll bars, bump stops, unsprung vibration and front/rear coupling. Static deflection is wheel-side displacement in the model, not a ride-height change or remaining damper travel.
TOP