Skip to main content

Plus-size options

Find tyre sizes with almost the same diameter as the original, for each rim diameter.

These candidates meet calculated conditions such as diameter. The tolerance settings are not pass/fail criteria for fitment or shaken (vehicle inspection). Without a load index (LI), the required load capacity cannot be checked. Also check the tyre standard, pressure, approved rim width and the product's fitment information. For vehicles with different front and rear sizes, check which wheel is used as the reference and compare front and rear separately.

What is “shaken”? (Japan’s vehicle inspection)

Shaken (車検) is Japan’s compulsory roadworthiness inspection. A typical private car is first inspected three years after it is first registered, and every two years after that. A car without a valid shaken certificate cannot be driven on public roads in Japan.

The inspection checks that the car still meets Japan’s vehicle safety standards. For wheels and tyres, this includes whether the tyres stick out beyond the bodywork, whether the tyres have enough load capacity, and whether the speedometer still reads within the permitted range after a size change.

Shaken costs combine fixed government charges (vehicle weight tax, compulsory third-party insurance known as jibaiseki, and inspection fees) with any repair or service charges from the workshop.

This is a Japan-only system. If your car is registered in another country, follow that country’s roadworthiness and vehicle modification rules instead; this site’s pass/fail guides do not apply there.

SUV illustration

Selected vehicle: フォード エスケープ EPEWF XLT (4AT) · 2002/01–

Change vehicle

Selected vehicle's original size (Both axles)

225/70R15

Diameter 696.0mm / add the LI (e.g. 91H) to exclude products with insufficient load capacity

Allowed diameter difference

%
%
  • 265/55R16
    Diameter 697.9mm
    Difference +1.9mm(+0.27%)
    At 40 km/h 40.1km/h
    Rim Width 7.5〜9.5J (estimate)
  • 205/70R16
    Diameter 693.4mm
    Difference −2.6mm(−0.37%)
    At 40 km/h 39.9km/h
    Rim Width 5.5〜7.5J (estimate)
    Check fitment
    • NANKANG HD-757 tread pattern (simplified CG illustration)

      NANKANG HD-757

      Summer·Standard 111/109N LT Diameter 696mm

      ¥15,290/tyre

      Buy

    LT is a standard for light trucks and vans. When fitting to a passenger car, take care with the different pressures and ride comfort.

    Prices are per tyre including Japanese consumption tax (as of 2026/11/12; check the shop page for current prices and stock). Product names link to the manufacturer's official product page (or the shop's product page if there is none).

    Tread pattern images are simplified illustrations of the groove features made by this site and may differ from the actual product (“Image” means the illustration is not ready yet).

  • 225/65R16
    Diameter 698.9mm
    Difference +2.9mm(+0.42%)
    At 40 km/h 40.2km/h
    Rim Width 6〜8J (estimate)
    Check fitment
    • MAXTREK SIERRA S6 tread pattern (simplified CG illustration)

      MAXTREK SIERRA S6

      Summer·Standard 100H Diameter 699mm

      ¥11,790/tyre

      Buy

    Prices are per tyre including Japanese consumption tax (as of 2026/11/12; check the shop page for current prices and stock). Product names link to the manufacturer's official product page (or the shop's product page if there is none).

    Tread pattern images are simplified illustrations of the groove features made by this site and may differ from the actual product (“Image” means the illustration is not ready yet).

  • 245/60R16
    Diameter 700.4mm
    Difference +4.4mm(+0.63%)
    At 40 km/h 40.3km/h
    Rim Width 7〜8.5J (estimate)
  • 215/70R16
    Diameter 707.4mm
    Difference +11.4mm(+1.64%)
    At 40 km/h 40.7km/h
    Rim Width 5.5〜7J
    Check fitment

    XL (extra load) tyres may need higher pressure than the original specification.

    LT is a standard for light trucks and vans. When fitting to a passenger car, take care with the different pressures and ride comfort.

    Prices are per tyre including Japanese consumption tax (as of 2026/11/12; check the shop page for current prices and stock). Product names link to the manufacturer's official product page (or the shop's product page if there is none).

    Tread pattern images are simplified illustrations of the groove features made by this site and may differ from the actual product (“Image” means the illustration is not ready yet).

  • 235/65R16
    Diameter 711.9mm
    Difference +15.9mm(+2.28%)
    At 40 km/h 40.9km/h
    Rim Width 6.5〜8.5J (estimate)
  • 255/60R16
    Diameter 712.4mm
    Difference +16.4mm(+2.36%)
    At 40 km/h 40.9km/h
    Rim Width 7〜9J (estimate)
  • 205/75R16
    Diameter 713.9mm
    Difference +17.9mm(+2.57%)
    At 40 km/h 41.0km/h
    Rim Width 5.5〜7.5J (estimate)
    Check fitment
    • DAVANTI DX440 tread pattern (simplified CG illustration)

      DAVANTI DX440

      Summer·Standard 113/111R LT Diameter 714mm

      ¥13,930/tyre

      Buy
    • HANKOOK Vantra Transit tread pattern (simplified CG illustration)

      HANKOOK Vantra Transit

      Summer 113/111R LT Diameter 710mm

    • MICHELIN AGILIS 3 tread pattern (simplified CG illustration)

      MICHELIN AGILIS 3

      Summer 113/111R LT Diameter 714mm

    • MICHELIN AGILIS CROSSCLIMATE tread pattern (simplified CG illustration)

      MICHELIN AGILIS CROSSCLIMATE

      All-season 113/111R LT Diameter 714mm

    LT is a standard for light trucks and vans. When fitting to a passenger car, take care with the different pressures and ride comfort.

    Prices are per tyre including Japanese consumption tax (as of 2026/11/12; check the shop page for current prices and stock). Product names link to the manufacturer's official product page (or the shop's product page if there is none).

    Tread pattern images are simplified illustrations of the groove features made by this site and may differ from the actual product (“Image” means the illustration is not ready yet).

Sorted by smallest absolute diameter difference, then by width closest to original. Approved rim widths come from product data, or from an approximation formula if unavailable.

TOP