Skip to main content

READ YOUR SIZE

Size markings

The numbers printed on tyres and wheels each have a meaning. Once you can read them, you have taken the first step towards comparing sizes.

01 / TIRE

Reading a tyre size

You will usually find it on the side of the tyre (the sidewall).

205 / 55 R 1691 V
205 | Tyre width
The nominal section width in mm. The actual width varies with the product and the rim width it is mounted on.
55 | Aspect ratio
The sidewall height as a percentage of the width. In this example the calculated height is 205 × 0.55 = 112.75 mm.
R | Construction
Stands for radial construction. It is not a unit of radius or rim diameter.
16 | Rim diameter
The rim diameter of the wheel it fits, in inches (1 inch = 25.4 mm).
91 | Load index (LI)
An index for the maximum load the tyre can carry under specified conditions. It does not mean 91 kg.
V | Speed symbol
The maximum speed category the tyre is rated for under specified conditions. Choose one that meets your vehicle's specification.

02 / WHEEL

Reading a wheel size

Check the markings or labels on the back of the wheel, or the manufacturer's specification sheet.

16 × 6.5 J +455H / PCD 114.3
16 | Rim diameter
The nominal diameter of the part the tyre is mounted on. It must match the tyre's rim diameter.
6.5 | Rim width
The width of the part that holds the tyre, in inches. It is not the overall edge-to-edge width of the wheel.
J | Flange profile
A code for the shape of the rim edge. It is written together with the width, as in “6.5J”, but J is not a unit of width.
+45 | Inset (offset)
The distance from the centre of the rim width to the mounting face — plus 45 mm in this example. Enter it in the “Inset” field on this site. In Japan this value used to be called “offset”, and it is also written as “ET45”.
5H / PCD 114.3 | Stud count and pattern
Five bolt holes on a circle 114.3 mm in diameter through their centres. Check it against your vehicle's specification.
Also check the centre bore and nut seat
Even if the diameter, width and inset are right, the wheel may not fit if the centre bore or the fastener specification is different.

Now you know the numbers, compare your current and new setup.

Enter the wheel diameter, width and inset plus the tyre width and aspect ratio to see how the position and overall diameter change.

Go to the inset calculator →

Sources: Yokohama Tire: How to read tyre markings (Japanese), ENKEI: wheel terminology and size markings (Japanese), Bridgestone: About wheels (Japanese)

Original sizes by model code and grade, plus-size and winter minus-size options, and shortcuts to the inset calculator.

TOP