Skip to main content

TIRE BASICS

Tyre basics

What the numbers on the sidewall mean, and guidelines for using tyres safely. The essentials to know before replacing tyres or changing sizes.

Reading the size marking

215/45R17 91W XL

215
Tyre width (mm)
45
Aspect ratio (sidewall height as a percentage of width)
R17
Radial construction, 17-inch rim diameter
91
Load index (an index for the load one tyre can carry)
W
Speed symbol (maximum speed at that load)
XL
Extra Load standard (carries more load in the same size by running higher pressure)

Wheel basics (inset, PCD, centre bore, nuts) →

Load index

The load index (LI) is an index for the load a single tyre can carry under specified conditions. When changing sizes, make sure the load capacity does not fall below what the vehicle specifies. Check not only the LI number but also the standard (STD, XL, etc.) and the inflation pressure: tyres with the same LI can carry different loads depending on the standard and pressure.

  1. Check the specified front and rear sizes and pressures on the vehicle's placard or in the owner's manual.
  2. Check the standard of the replacement tyre and the manufacturer's load-by-pressure table.
  3. Ask your dealer to confirm that the required load capacity is met at both the front and rear. When switching to XL tyres, don't simply reuse the specified pressure or raise it on your own judgement.

Bridgestone: load capacity by inflation pressure (Japanese) (checked 15 November 2026). For the applicable standard and product conditions, the manufacturer's documentation takes precedence.

Load index and load capacity chart
  • 60250kg
  • 61257kg
  • 62265kg
  • 63272kg
  • 64280kg
  • 65290kg
  • 66300kg
  • 67307kg
  • 68315kg
  • 69325kg
  • 70335kg
  • 71345kg
  • 72355kg
  • 73365kg
  • 74375kg
  • 75387kg
  • 76400kg
  • 77412kg
  • 78425kg
  • 79437kg
  • 80450kg
  • 81462kg
  • 82475kg
  • 83487kg
  • 84500kg
  • 85515kg
  • 86530kg
  • 87545kg
  • 88560kg
  • 89580kg
  • 90600kg
  • 91615kg
  • 92630kg
  • 93650kg
  • 94670kg
  • 95690kg
  • 96710kg
  • 97730kg
  • 98750kg
  • 99775kg
  • 100800kg
  • 101825kg
  • 102850kg
  • 103875kg
  • 104900kg
  • 105925kg
  • 106950kg
  • 107975kg
  • 1081,000kg
  • 1091,030kg
  • 1101,060kg
  • 1111,090kg
  • 1121,120kg
  • 1131,150kg
  • 1141,180kg
  • 1151,215kg
  • 1161,250kg
  • 1171,285kg
  • 1181,320kg
  • 1191,360kg
  • 1201,400kg
  • 1211,450kg
  • 1221,500kg
  • 1231,550kg
  • 1241,600kg
  • 1251,650kg
  • 1261,700kg
  • 1271,750kg
  • 1281,800kg
  • 1291,850kg
  • 1301,900kg

Load capacity per tyre under specified conditions. Front and rear axles carry different loads, so comparing the total for four tyres with the gross vehicle weight is not enough. Check the actual load capacity together with the tyre standard and inflation pressure.

Speed symbol

The maximum speed the tyre can sustain while carrying its load-index load. As a rule, choose the same symbol as the original or a higher one. Tyres rated above 240 km/h show “ZR” in the size, and those rated above 300 km/h show “(Y)”.

  • L120km/h
  • M130km/h
  • N140km/h
  • P150km/h
  • Q160km/h
  • R170km/h
  • S180km/h
  • T190km/h
  • U200km/h
  • H210km/h
  • V240km/h
  • W270km/h
  • Y300km/h

Reading the manufacture date

The last four digits of the serial code on the sidewall are the week and year of manufacture: the first two digits are the week and the last two are the year.

2324 → made in week 23 of 2024 (early June)

Tyres made in 1999 or earlier use three digits (two for the week plus the last digit of the year). Even when buying new tyres, it is worth checking how long ago they were made.

Minimum tread depth (wear indicators)

Tyres with less than 1.6 mm of tread depth must not be used (under Japan's vehicle safety standards, the Road Trucking Vehicle Act safety regulations). When the tread wears down to 1.6 mm, raised bars in the grooves — the tread wear indicators — become flush with the surface. They are in line with the “△” marks on the sidewall.

  • Summer tyres: replace them once the wear indicators show. Wet braking performance starts to drop well before that limit
  • Winter tyres (studless): once the “platform” indicators in the grooves show (at about half the new tread depth), they can no longer be used as winter tyres

Tyre pressure

Your car's specified pressure is shown on the placard inside the driver's door opening or in the owner's manual. Tyres lose air naturally, so check them with a gauge at least once a month. Low-profile tyres look much the same even when the pressure is low.

  • Too low: worse fuel economy, vague handling, and a risk of damage at high speed
  • Too high: a harsher ride, and a smaller contact patch that makes steering less stable

After plus-sizing or switching to XL tyres, reset the pressure so the tyres can carry the same load as the originals (ask your dealer).

When to replace tyres

Tyre rubber hardens and cracks with age, even if the car is not driven. The Japan Automobile Tyre Manufacturers Association (JATMA) recommends having tyres inspected by a dealer once they have been in use for five years or more, and replacing them 10 years after manufacture even if tread remains (spare tyres included). These are guidelines only; depending on storage and use, tyres may need replacing sooner.

Changing sizes or wheels? Check for poke too

Even with the right load index and speed symbol, the wheel's rim width and inset can make the tyre and wheel stick out past the wheel arch or hit the suspension on the inside. A cross-section diagram shows how many mm further out it sits compared with your current size.

Original sizes by model code and grade, plus-size and winter minus-size options, and shortcuts to the inset calculator.

Sources: government, industry bodies and manufacturers

Figures are general guidelines. Check your own car's specification (pressures and sizes) in the owner's manual and on the vehicle placard.

TOP