Skip to main content

GOOD QUESTIONS. BETTER FIT.

Tyre and wheel FAQ

The questions people ask when choosing sizes for the first time, answered one by one.

Are offset and inset different things?

They are the same thing: the distance from the centre of the rim width to the mounting face. In Japan it used to be called “offset”, but since a revision of the Japanese Industrial Standards (JIS) it is officially called “inset”. This site uses “inset” and treats it as a positive, zero or negative number (“+45” means the mounting face sits 45 mm outboard of the centreline). Values labelled “offset” or “ET” on wheels and in shops are the same figure.

How to read a wheel size →
Does a smaller inset push the wheel outwards?

With the same rim width, the lower the number, the further out the wheel sits. Going from +45 to +40, for example, moves it 5 mm outwards. If you also change the width, check the effect on both the inner and outer side.

Calculate the change in position →
What is plus-sizing?

Fitting wheels with a larger rim diameter. The basic idea is to adjust the tyre's aspect ratio and so on to keep the overall diameter close to the original. Besides the looks, it can also affect ride comfort and the weight of the tyres and wheels.

Go to the plus-sizing guide →
If the overall diameter is similar, will any size fit?

Diameter alone is not enough. You also need to check the tyre's load capacity and approved rim widths, the wheel's PCD, stud count, centre bore and fasteners, and clearance to the brakes and suspension. Even with the same size marking, results differ with each product's shape.

How do I choose the load index (LI)?

Choose one that does not fall below the original load capacity. Load capacity also depends on the tyre standard and inflation pressure, so check the manufacturer's load/pressure table rather than just the number. With XL (extra load) tyres, take particular care with the pressure setting.

How is a tyre's overall diameter calculated?

The calculated overall diameter is “rim diameter × 25.4 + tyre width × aspect ratio ÷ 100 × 2”. For 205/55R16 that is 631.9 mm. The real diameter varies with the product, pressure, wear and so on, so check the manufacturer's dimension tables too.

Can I decide whether it fits from the calculation alone?

This site compares the dimensions you enter. It does not model spoke shape, brake clearance, or contact when steering or as the suspension moves. Always confirm the final fitment with the product's fitment information and on the actual car.

Sources: Yokohama Tire: About plus-sizing (Japanese), ENKEI: wheel terminology and size markings (Japanese), Bridgestone: About wheels (Japanese)

TOP