Skip to main content
Coupe illustration

BMW

2シリーズクーペ2G30 Original tyre and wheel sizes and specifications

  • 2016–
  • 1 variant
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Front

Tyres
225/40R18
Diameter 637.2mm
Tyre list 74 models
Wheel (diameter x width, offset)
18x7.5J +45
Matching wheels

Rear

Tyres
245/35R18
Diameter 628.7mm
Tyre list 23 models
Wheel (diameter x width, offset)
18x8J +52
Matching wheels
PCD and studs
5H-120
Centre bore
Not registered

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

The original tyre size for the BMW 2シリーズクーペ (2G30, 2016–) is Front 225/40R18, Rear 245/35R18, the wheel size is Front 18x7.5J +45, Rear 18x8J +52 (offset Front +45, Rear +52), the PCD is 5H-120.

BY GRADE

Original sizes by grade and year

1 variant · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

  1. Front
    Tyres
    225/40R18
    Wheel
    18x7.5J +45
    Diameter
    637.2 mm
    Rear
    Tyres
    245/35R18
    Wheel
    18x8J +52
    Diameter
    628.7 mm

    PCD 5H-120 Centre bore Not registered

    Matching variants (1)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel
    標準 — — — — —

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the 2シリーズクーペ

Estimated from the registered specifications of 2G30 / 標準 and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
Check specifications
Weight tax (2 years, standard rate)
Check specifications
Statutory shaken costs (reference)
Enter conditions

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

INCH UP

Plus-size guide for the 2シリーズクーペ (2G30)

Sizes with a diameter close to the original 225/40R18 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
19 inch 255/30R19 635.6mm −1.6mm (−0.25%) 39.9km/h 7–9J
225/35R19 640.1mm +2.9mm (+0.46%) 40.2km/h 6–8J
215/35R19 633.1mm −4.1mm (−0.64%) 39.7km/h 6–7.5J
20 inch 215/30R20 637.0mm −0.2mm (−0.03%) 40.0km/h 6–7.5J
255/25R20 635.5mm −1.7mm (−0.27%) 39.9km/h 7–9J
225/30R20 643.0mm +5.8mm (+0.91%) 40.4km/h 6–8J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 225/40R18 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

2シリーズクーペ (2G30) FAQ

Tap a question to show the answer.

What is the original tyre size for the 2シリーズクーペ (2G30)?

Front 225/40R18, Rear 245/35R18 on most grades.

What are the original wheel size, PCD and centre bore for the 2シリーズクーペ (2G30)?

Original wheel: Front 18x7.5J +45, Rear 18x8J +52, PCD: 5H-120. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the 2シリーズクーペ (2G30)?

The original Front 18x7.5J +45, Rear 18x8J +52 wheel has an offset of Front +45, Rear +52. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the 2シリーズクーペ (2G30) for plus sizing?

Sizes with a diameter close to the original (225/40R18): 19 inch: 255/30R19 (diameter difference −0.3%), 20 inch: 215/30R20 (diameter difference −0.0%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the 2シリーズクーペ (2G30) sold, and which grades are listed?

Sold 2016–. 1 variants are listed (1 grades).

TOOLS FOR YOUR CAR

Use the tools with 2シリーズクーペ data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other 2シリーズクーペ generations

More BMW models →
TOP