BMW 3シリーズカブリオレ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation DX35 (2010–)
Original 225/45R17 · 17x8J +34
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
5 generations
-
DX35 2010– Original tyre 225/45R17, 255/40R17, 225/40R18 and more Original wheels Front 17x8J +34, Rear 17x8.5J +37 PCD 5H-120
-
WL35 2007– Original tyre 225/40R18, 255/35R18, 225/45R17 and more Original wheels Front 18x8J +46, Rear 18x8.5J +50 PCD 5H-120
-
AV30 2000– Original tyre 225/45R17, 245/40R17, 205/50R17 and more Original wheels 17x8J +47 PCD 5H-120
-
BK28 1995– Original tyre 205/60R15 Original wheels 15x7J +47 PCD 5H-120
-
BJ25 1993– Original tyre 205/60R15 Original wheels 15x7J +47 PCD 5H-120
SIZE GUIDE
3シリーズカブリオレ tyre size guide
Original tyre and wheel sizes for the BMW 3シリーズカブリオレ by generation and grade (5 generations). On the latest DX35 (2010–), the original tyre is Front 225/45R17, Rear 255/40R17 and the wheel is Front 17x8J +34, Rear 17x8.5J +37.
BY GRADE
DX35 original sizes by grade
-
17 inch (225/45R17, 255/40R17)
1 variant
- Front
- 225/45R17 · 17x8J +34 Diameter 634.3mm
- Rear
- 255/40R17 · 17x8.5J +37 Diameter 635.8mm
- Grade
- 標準
-
18 inch (225/40R18, 255/35R18)
1 variant
- Front
- 225/40R18 · 18x8J +34 Diameter 637.2mm
- Rear
- 255/35R18 · 18x8.5J +37 Diameter 635.7mm
- Grade
- 標準
INCH UP
If you go up in size
Sizes with a diameter close to the DX35 original 225/45R17. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
18 inch
-
255/35R18
Diameter +1.4mm · guide 8.5J +35
-
225/40R18
Diameter +2.9mm · guide 8J +34
-
215/40R18
Diameter −5.1mm · guide 7.5J +27
19 inch
-
215/35R19
Diameter −1.2mm · guide 7.5J +27
-
255/30R19
Diameter +1.3mm · guide 8.5J +35
-
245/30R19
Diameter −4.7mm · guide 8.5J +35
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 225/45R17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
16 inch
225/50R16
Diameter −2.9mm·guide 8J +34
-
16 inch
235/50R16
Diameter +7.1mm·guide 8.5J +35
-
16 inch
215/55R16
Diameter +8.6mm·guide 7.5J +27
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
3シリーズカブリオレ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the 3シリーズカブリオレ use?
On the latest DX35 (2010–), the original tyre on most grades is Front 225/45R17, Rear 255/40R17. There are 2 sizes depending on grade: 225/45R17, 255/40R17, 225/40R18, 255/35R18. Sizes also vary by generation (year); 225/45R17, 225/40R18, 255/35R18, 255/40R17, 205/60R15, 245/40R17 etc. have been used so far.
What are the original wheel size and PCD of the 3シリーズカブリオレ?
On the latest DX35 (2010–), the original wheel is Front 17x8J +34, Rear 17x8.5J +37, the PCD is 5H-120. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the 3シリーズカブリオレ for plus sizing?
To keep the diameter close to the original (225/45R17), the calculated guide is 18 inch: 255/35R18, 19 inch: 215/35R19. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the 3シリーズカブリオレ use smaller wheels for winter tyres?
At 16 inch, one inch smaller than the original (225/45R17), sizes with a similar diameter are 225/50R16, 235/50R16, 215/55R16. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the 3シリーズカブリオレ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →