Skip to main content
Coupe illustration

BMW

3シリーズKD20G Original tyre and wheel sizes and specifications

  • 2010/05–2012/12
  • クーペ・スポーツ・スペシャリティ
  • 1,995cc
  • 2WD
  • 6MT
  • 2 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Both axles

Tyres
225/45R17
Diameter 634.3mm
Tyre list 82 models
Wheel (diameter x width, offset)
17x8J +34
Matching wheels
PCD and studs
5H-120
Centre bore
72.6mm
Battery
LN3
See types and where to buy ↓
Fuel economy
JC08 mode 15.2km/L
See by test cycle ↓

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

SPECS

Key specifications

Engine
N43B20A 1,995cc
Max. power
170PS
Vehicle weight
1,450kg
Length × width × height
4,610×1,780×1,400mm
Seating capacity
4 seats
New-car price
¥4,680,000 (incl. tax)

The original tyre size for the BMW 3シリーズ (KD20G, May 2010–Dec 2012) is 225/45R17, the wheel size is 17x8J +34 (offset +34), the PCD is 5H-120, the centre bore is 72.6mm. Battery: LN3, fuel economy: JC08 mode 15.2km/L.

BY GRADE

Original sizes by grade and year

2 variants · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

  1. Original 17 inch (225/45R17)

    2dr C/P・320i クーペ · 2 variants · 2010/05–2012/12

    Both axles
    Tyres
    225/45R17
    Wheel
    17x8J +34
    Diameter
    634.3 mm

    PCD 5H-120 Centre bore 72.6 mm

    Matching variants (2)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel Engine / max. power Vehicle weight Battery
    2WD・2.0・2dr C/P・320i クーペ・6MT LBA-KD20G 2011/10–2012/12 1,995 cc 4 seats Unleaded premium petrol N43B20A 170PS (125kW)/6700rpm 1,450 kg LN3
    2.0・2WD・2dr C/P・320i クーペ・6MT LBA-KD20G 2010/05–2011/10 1,995 cc 4 seats Unleaded premium petrol N43B20A 170PS (125kW)/6700rpm 1,450 kg LN3

BATTERY & FUEL

3シリーズ KD20G battery size and fuel economy

For battery replacement and fuel economy reference. Original battery types and catalogue figures.

Battery size

Battery types fitted when new. The cold-climate type applies to cars built for cold regions (or ordered with the cold-climate package).

Idle-stop and hybrid vehicles need dedicated batteries. Before replacing, also check the label on the battery currently fitted. The “Search on …” links open each online shop's search results for the battery type in a new window.

Fuel economy (catalogue)

JC08 mode
15.2km/L
10-15 mode
17.4km/L

Range across the listed variants. Figures from different test cycles cannot be compared, so they are shown separately. Larger tyres can slightly worsen fuel economy.

SPECS

3シリーズ KD20G specifications

Basics

Sales period
2010/05–2012/12
Model code
LBA-KD20G
Body type
クーペ・スポーツ・スペシャリティ
Drive
2WD
Transmission
6MT
Seating capacity
4 seats
New-car price
¥4,680,000

Engine and fuel economy

Engine code
N43B20A
Engine
直列4気筒DOHC
Displacement
1,995cc
Max. power
170PS
Max. torque
210N·m
Fuel
Premium petrol
Fuel economy
15.2km/L(JC08)

Dimensions and weight

Length × width × height
4,610×1,780×1,400mm
Wheelbase
2,760mm
Track front / rear
1,500mm / 1,515mm
Vehicle weight
1,450kg
Min. turning radius
5.3m

Suspension

Suspension front / rear
ダブル・ジョイント・スプリング・ストラット式、コイルスプリング、スタビライザー / 5リンク式、コイル・スプリング、スタビライザー
Brakes front / rear
ベンチレーテッドディスク

Figures are ranges across the listed variants. Fuel economy is the catalogue figure (test cycle); new-car prices include tax.

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the 3シリーズ

Estimated from the registered specifications of KD20G / 2dr C/P・320i クーペ (2WD, 6MT) and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
¥36,000
Weight tax (2 years, standard rate)
¥24,600
Statutory shaken costs (reference)
¥45,260

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

Catalogue by grade

Loading…

INCH UP

Plus-size guide for the 3シリーズ (KD20G)

Sizes with a diameter close to the original 225/45R17 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
18 inch 255/35R18 635.7mm +1.4mm (+0.22%) 40.1km/h 7–9J
225/40R18 637.2mm +2.9mm (+0.46%) 40.2km/h 6–8J
215/40R18 629.2mm −5.1mm (−0.80%) 39.7km/h 6–7.5J
19 inch 215/35R19 633.1mm −1.2mm (−0.19%) 39.9km/h 6–7.5J
255/30R19 635.6mm +1.3mm (+0.20%) 40.1km/h 7–9J
245/30R19 629.6mm −4.7mm (−0.74%) 39.7km/h 7–8.5J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 225/45R17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

3シリーズ (KD20G) FAQ

Tap a question to show the answer.

What is the original tyre size for the 3シリーズ (KD20G)?

225/45R17 on most grades.

What are the original wheel size, PCD and centre bore for the 3シリーズ (KD20G)?

Original wheel: 17x8J +34, PCD: 5H-120, centre bore: 72.6mm. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the 3シリーズ (KD20G)?

The original 17x8J +34 wheel has an offset of +34. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the 3シリーズ (KD20G) for plus sizing?

Sizes with a diameter close to the original (225/45R17): 18 inch: 255/35R18 (diameter difference +0.2%), 19 inch: 215/35R19 (diameter difference −0.2%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

What battery size does the 3シリーズ (KD20G) use?

Standard: LN3. When replacing it, also check the type of the battery currently fitted (for example, whether it is for idle-stop or hybrid vehicles).

What is the fuel economy of the 3シリーズ (KD20G)?

Catalogue figure: JC08 mode 15.2km/L (range across the listed variants). Larger or heavier tyres can slightly worsen fuel economy.

What are the body dimensions (width) and weight of the 3シリーズ (KD20G)?

Length 4,610mm, width 1,780mm, height 1,400mm, vehicle weight 1,450kg. Vehicle weight is a guide when choosing the tyre load index.

When was the 3シリーズ (KD20G) sold, and which grades are listed?

Sold May 2010–Dec 2012. 2 variants are listed (1 grades), drive: 2WD, transmission: 6MT.

TOOLS FOR YOUR CAR

Use the tools with 3シリーズ data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other 3シリーズ generations

More BMW models →
TOP