Skip to main content
Coupe illustration

BMW

8シリーズクーペBC30 Original tyre and wheel sizes and specifications

  • 2019–
  • 3 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

3 sizes depending on grade and year

Most common original size:

Front

Tyres
245/35R20
Diameter 679.5mm
Tyre list 43 models
Wheel (diameter x width, offset)
20x8J +26
Matching wheels

Rear

Tyres
275/30R20
Diameter 673.0mm
Tyre list 29 models
Wheel (diameter x width, offset)
20x9J +41
Matching wheels
PCD and studs
5H-112
Centre bore
Not registered

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

The original tyre size for the BMW 8シリーズクーペ (BC30, 2019–) is Front 245/35R20, Rear 275/30R20, the wheel size is Front 20x8J +26, Rear 20x9J +41 (offset Front +26, Rear +41), the PCD is 5H-112. There are 3 original sizes depending on grade and year, including 245/35R20, 275/30R20, 245/45R18, 275/40R18 etc..

BY GRADE

Original sizes by grade and year

3 variants · 3 original sizes

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

This generation has 3 combinations of original tyres and wheels depending on grade and year. Choose the one that includes your car's grade and year (see “Matching variants” on each card).

  1. Front
    Tyres
    245/35R20
    Wheel
    20x8J +26
    Diameter
    679.5 mm
    Rear
    Tyres
    275/30R20
    Wheel
    20x9J +41
    Diameter
    673.0 mm

    PCD 5H-112 Centre bore Not registered

    Matching variants (1)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel
    標準 — — — — —
  2. Front
    Tyres
    245/45R18
    Wheel
    18x8J +30
    Diameter
    677.7 mm
    Rear
    Tyres
    275/40R18
    Wheel
    18x9J +41
    Diameter
    677.2 mm

    PCD 5H-112 Centre bore Not registered

    Matching variants (1)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel
    標準 — — — — —
  3. Front
    Tyres
    245/40R19
    Wheel
    19x8J +26
    Diameter
    678.6 mm
    Rear
    Tyres
    275/35R19
    Wheel
    19x9J +41
    Diameter
    675.1 mm

    PCD 5H-112 Centre bore Not registered

    Matching variants (1)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel
    標準 — — — — —

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the 8シリーズクーペ

Estimated from the registered specifications of BC30 / 標準 and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
Check specifications
Weight tax (2 years, standard rate)
Check specifications
Statutory shaken costs (reference)
Enter conditions

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

INCH UP

Plus-size guide for the 8シリーズクーペ (BC30)

Sizes with a diameter close to the original 245/35R20 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
21 inch 245/30R21 680.4mm +0.9mm (+0.13%) 40.1km/h 7–8.5J
235/30R21 674.4mm −5.1mm (−0.75%) 39.7km/h 6.5–8.5J
255/30R21 686.4mm +6.9mm (+1.02%) 40.4km/h 7–9J
22 inch 245/25R22 681.3mm +1.8mm (+0.26%) 40.1km/h 7–8.5J
235/25R22 676.3mm −3.2mm (−0.47%) 39.8km/h 6.5–8.5J
255/25R22 686.3mm +6.8mm (+1.00%) 40.4km/h 7–9J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 245/35R20 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

8シリーズクーペ (BC30) FAQ

Tap a question to show the answer.

What is the original tyre size for the 8シリーズクーペ (BC30)?

Front 245/35R20, Rear 275/30R20 on most grades. There are 3 sizes depending on grade and year: 245/35R20, 275/30R20, 245/45R18, 275/40R18, 245/40R19, 275/35R19. Check your car's grade and year in the list above.

What are the original wheel size, PCD and centre bore for the 8シリーズクーペ (BC30)?

Original wheel: Front 20x8J +26, Rear 20x9J +41, PCD: 5H-112. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the 8シリーズクーペ (BC30)?

The original Front 20x8J +26, Rear 20x9J +41 wheel has an offset of Front +26, Rear +41. Some grades and years use +30. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the 8シリーズクーペ (BC30) for plus sizing?

Sizes with a diameter close to the original (245/35R20): 21 inch: 245/30R21 (diameter difference +0.1%), 22 inch: 245/25R22 (diameter difference +0.3%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the 8シリーズクーペ (BC30) sold, and which grades are listed?

Sold 2019–. 3 variants are listed (1 grades).

TOOLS FOR YOUR CAR

Use the tools with 8シリーズクーペ data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other 8シリーズクーペ generations

More BMW models →
TOP