Skip to main content

ダイハツ アプローズθ
original tyre and wheel sizes

Choose your generation to see original sizes by grade and calculate offset and protrusion.

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

Latest generation A101S (1990–)

Original 175/70R13 82H

See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.

BY GENERATION

Original sizes by generation

2 generations

SIZE GUIDE

アプローズθ tyre size guide

Original tyre and wheel sizes for the ダイハツ アプローズθ by generation and grade (2 generations). On the latest A101S (1990–), the original tyre is 175/70R13 82H.

BY GRADE

A101S original sizes by grade

FAQ

アプローズθ tyre and wheel FAQ

Tap a question to show the answer.

What tyre size does the アプローズθ use?

On the latest A101S (1990–), the original tyre on most grades is 175/70R13 82H. There are 2 sizes depending on grade: 175/70R13 82H, 185/60R14 82H. Sizes also vary by generation (year); 185/60R14 82H, 175/70R13 82H have been used so far.

Which sizes suit the アプローズθ for plus sizing?

To keep the diameter close to the original (175/70R13 82H), the calculated guide is 14 inch: 185/60R14, 15 inch: 195/50R15. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.

Can the アプローズθ use smaller wheels for winter tyres?

At 12 inch, one inch smaller than the original (175/70R13 82H), sizes with a similar diameter are 175/80R12, 185/75R12, 165/85R12. On cars with large brakes (calipers) the wheel may foul them, so check fitment.

How do I choose the offset for aftermarket wheels on the アプローズθ?

In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.

Tyre basics (load index, date code, tread wear limits and more) →

TOP