ダイハツ エッセ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation L235S (Dec 2005–Sep 2011)
Original 145/80R12 · 12x4J +35
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
2 generations
SIZE GUIDE
エッセ tyre size guide
Original tyre and wheel sizes for the ダイハツ エッセ by generation and grade (2 generations). On the latest L235S (Dec 2005–Sep 2011), the original tyre is 145/80R12 and the wheel is 12x4J +35.
BY GRADE
L235S original sizes by grade
-
12 inch (145/80R12)
10 variants
- Front & rear
- 145/80R12 · 12x4J +35 Diameter 536.8mm
- Grade
- X スペシャル, D, Dセレクション, VSメモリアルエディション, L, エコ
-
14 inch (155/65R14)
6 variants
- Front & rear
- 155/65R14 · 14x4J +40 Diameter 557.1mm
- Grade
- カスタム
-
13 inch (145/80R13)
3 variants
- Front & rear
- 145/80R13 · 13x4J +35 Diameter 562.2mm
- Grade
- X, D
-
13 inch (155/65R13)
2 variants
- Front & rear
- 155/65R13 · 13x4J +40 Diameter 531.7mm
- Grade
- X
INCH UP
If you go up in size
Sizes with a diameter close to the L235S original 145/80R12. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
13 inch
-
175/60R13
Diameter +3.4mm · guide 5J +30
-
145/70R13
Diameter −3.6mm · guide 4.5J +36
-
135/75R13
Diameter −4.1mm · guide 4.5J +36
14 inch
-
165/55R14
Diameter +0.3mm · guide 4.5J +36
-
155/60R14
Diameter +4.8mm · guide 4.5J +36
-
145/65R14
Diameter +7.3mm · guide 4.5J +36
FAQ
エッセ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the エッセ use?
On the latest L235S (Dec 2005–Sep 2011), the original tyre on most grades is 145/80R12. There are 4 sizes depending on grade: 145/80R12, 155/65R14, 145/80R13, 155/65R13. Sizes also vary by generation (year); 145/80R12, 155/65R14, 145/80R13, 155/65R13 have been used so far.
What are the original wheel size and PCD of the エッセ?
On the latest L235S (Dec 2005–Sep 2011), the original wheel is 12x4J +35, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the エッセ for plus sizing?
To keep the diameter close to the original (145/80R12), the calculated guide is 13 inch: 175/60R13, 14 inch: 165/55R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
How do I choose the offset for aftermarket wheels on the エッセ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →