ダイハツ リーザ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation L111SK (1991–)
Original 155/70R12 73H
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
4 generations
-
L111SK 1991– Original tyre 155/70R12 73H Original wheels Not registered PCD Not registered
-
L111S 1990– Original tyre 145/70R12 69S, 155/60R13 69H Original wheels Not registered PCD Not registered
-
L100V 1989– Original tyre 145/70R12 69S, 155/70R12 73S Original wheels Not registered PCD Not registered
-
L100S 1989– Original tyre 145/70R12 69S Original wheels Not registered PCD Not registered
SIZE GUIDE
リーザ tyre size guide
Original tyre and wheel sizes for the ダイハツ リーザ by generation and grade (4 generations). On the latest L111SK (1991–), the original tyre is 155/70R12 73H.
BY GRADE
L111SK original sizes by grade
-
12 inch (155/70R12 73H)
2 variants
- Front & rear
- 155/70R12 73H Diameter 521.8mm
- Grade
- スパイダー
FAQ
リーザ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the リーザ use?
On the latest L111SK (1991–), the original tyre on most grades is 155/70R12 73H. Sizes also vary by generation (year); 145/70R12 69S, 155/70R12 73H, 155/60R13 69H, 155/70R12 73S have been used so far.
Which sizes suit the リーザ for plus sizing?
To keep the diameter close to the original (155/70R12 73H), the calculated guide is 13 inch: 175/55R13, 14 inch: 185/45R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
How do I choose the offset for aftermarket wheels on the リーザ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →