Skip to main content

ダイハツ パイザー
original tyre and wheel sizes

Choose your generation to see original sizes by grade and calculate offset and protrusion.

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

Latest generation G301G (Sep 1997–Jul 2002)

Original 185/65R14 · 14x5J +45

See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.

BY GENERATION

Original sizes by generation

4 generations

SIZE GUIDE

パイザー tyre size guide

Original tyre and wheel sizes for the ダイハツ パイザー by generation and grade (4 generations). On the latest G301G (Sep 1997–Jul 2002), the original tyre is 185/65R14 and the wheel is 14x5J +45.

BY GRADE

G301G original sizes by grade

INCH UP

If you go up in size

Sizes with a diameter close to the G301G original 185/65R14. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.

15 inch

16 inch

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 185/65R14 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

パイザー tyre and wheel FAQ

Tap a question to show the answer.

What tyre size does the パイザー use?

On the latest G301G (Sep 1997–Jul 2002), the original tyre on most grades is 185/65R14. Sizes also vary by generation (year); 185/65R14, 175/65R14 have been used so far.

What are the original wheel size and PCD of the パイザー?

On the latest G301G (Sep 1997–Jul 2002), the original wheel is 14x5J +45, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

Which sizes suit the パイザー for plus sizing?

To keep the diameter close to the original (185/65R14), the calculated guide is 15 inch: 215/50R15, 16 inch: 175/55R16. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.

Can the パイザー use smaller wheels for winter tyres?

At 13 inch, one inch smaller than the original (185/65R14), sizes with a similar diameter are 185/75R13, 175/75R13, 195/70R13. On cars with large brakes (calipers) the wheel may foul them, so check fitment.

How do I choose the offset for aftermarket wheels on the パイザー?

In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.

Tyre basics (load index, date code, tread wear limits and more) →

TOP