ホンダ インスパイア
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation CP3 (Dec 2007–Oct 2012)
Original 225/50R17 · 17x7.5J +55
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
9 generations
-
CP3 2007/12–2012/10 Original tyre 225/50R17 Original wheels 17x7.5J +55 PCD 5H-114.3
-
UC1 2003/06–2007/12 Original tyre 205/60R16 Original wheels 16x6.5J +55 PCD 5H-114.3
-
UA5 1998/10–2003/06 Original tyre 205/60R16, 215/50R17 Original wheels 16x6.5J +55 PCD 5H-114.3
-
UA4 1998/10–2003/06 Original tyre 205/60R15, 205/60R16 Original wheels 15x6.5J +55 PCD 5H-114.3
-
UA3 1995/07–1998/10 Original tyre 205/65R15 Original wheels 15x6J +55 PCD 4H-114.3
-
UA1 1995/02–1998/10 Original tyre 195/65R15 Original wheels 15x6J +55 PCD 4H-114.3
-
UA2 1995/02–1998/10 Original tyre 195/65R15, 205/65R15 Original wheels 15x6J +55 PCD 4H-114.3
-
CC3 1992/01–1992/10 Original tyre 195/60R15 Original wheels 15x6J +55 PCD 4H-114.3
-
CC2 1992/01–1995/02 Original tyre 205/60R15 Original wheels 15x6J +55 PCD 4H-114.3
SIZE GUIDE
インスパイア tyre size guide
Original tyre and wheel sizes for the ホンダ インスパイア by generation and grade (9 generations). On the latest CP3 (Dec 2007–Oct 2012), the original tyre is 225/50R17 and the wheel is 17x7.5J +55.
BY GRADE
CP3 original sizes by grade
-
17 inch (225/50R17)
4 variants
- Front & rear
- 225/50R17 · 17x7.5J +55 Diameter 656.8mm
- Grade
- ベースグレード, V6, 35iL, 35TL
INCH UP
If you go up in size
Sizes with a diameter close to the CP3 original 225/50R17. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
18 inch
-
225/45R18
Diameter +2.9mm · guide 8J +56
-
245/40R18
Diameter −3.6mm · guide 8J +56
-
255/40R18
Diameter +4.4mm · guide 8J +56
19 inch
-
215/40R19
Diameter −2.2mm · guide 7.5J +55
-
245/35R19
Diameter −2.7mm · guide 8J +56
-
255/35R19
Diameter +4.3mm · guide 8J +56
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 225/50R17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
16 inch
225/55R16
Diameter −2.9mm·guide 8J +56
-
16 inch
215/60R16
Diameter +7.6mm·guide 7.5J +55
-
16 inch
235/55R16
Diameter +8.1mm·guide 8J +56
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
インスパイア tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the インスパイア use?
On the latest CP3 (Dec 2007–Oct 2012), the original tyre on most grades is 225/50R17. Sizes also vary by generation (year); 205/60R16, 205/60R15, 205/65R15, 195/65R15, 225/50R17, 215/50R17 etc. have been used so far.
What are the original wheel size and PCD of the インスパイア?
On the latest CP3 (Dec 2007–Oct 2012), the original wheel is 17x7.5J +55, the PCD is 5H-114.3. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the インスパイア for plus sizing?
To keep the diameter close to the original (225/50R17), the calculated guide is 18 inch: 225/45R18, 19 inch: 215/40R19. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the インスパイア use smaller wheels for winter tyres?
At 16 inch, one inch smaller than the original (225/50R17), sizes with a similar diameter are 225/55R16, 215/60R16, 235/55R16. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the インスパイア?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →