Skip to main content

ホンダ ストリート
original tyre and wheel sizes

Choose your generation to see original sizes by grade and calculate offset and protrusion.

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

Latest generation HH3 (Mar 1990–Oct 1998)

Original 145SR12 · 12x3.5J +40

See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.

BY GENERATION

Original sizes by generation

4 generations

SIZE GUIDE

ストリート tyre size guide

Original tyre and wheel sizes for the ホンダ ストリート by generation and grade (4 generations). On the latest HH3 (Mar 1990–Oct 1998), the original tyre is 145SR12 and the wheel is 12x3.5J +40.

BY GRADE

HH3 original sizes by grade

INCH UP

If you go up in size

Sizes with a diameter close to the HH3 original 145SR12. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.

13 inch

14 inch

FAQ

ストリート tyre and wheel FAQ

Tap a question to show the answer.

What tyre size does the ストリート use?

On the latest HH3 (Mar 1990–Oct 1998), the original tyre on most grades is 145SR12. There are 2 sizes depending on grade: 145SR12, 145R12. Sizes also vary by generation (year); 145R12, 145SR12 have been used so far.

What are the original wheel size and PCD of the ストリート?

On the latest HH3 (Mar 1990–Oct 1998), the original wheel is 12x3.5J +40, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

Which sizes suit the ストリート for plus sizing?

To keep the diameter close to the original (145SR12), the calculated guide is 13 inch: 175/60R13, 14 inch: 155/60R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.

How do I choose the offset for aftermarket wheels on the ストリート?

In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.

Tyre basics (load index, date code, tread wear limits and more) →

TOP