ホンダ トゥデイ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation JA5 (Jan 1993–Jun 1997)
Original 145SR12 · 12x4J +45
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
8 generations
-
JA5 1993/01–1997/06 Original tyre 145SR12 Original wheels 12x4J +45 PCD 4H-100
-
JA4 1993/01–1997/06 Original tyre 155/70R12, 155/65R13 Original wheels 12x4J +35 PCD 4H-100
-
JW4 1990/04–1997/06 Original tyre 145SR12 Original wheels 12x4J +45 PCD 4H-100
-
JA3 1990/04–1993/01 Original tyre 155/65R13 Original wheels 13x4J +35 PCD 4H-100
-
JW3 1990/03–1997/06 Original tyre 145/70R12, 145/65R13 Original wheels 12x4J +35 PCD 4H-100
-
JA2 1990/03–1993/01 Original tyre 145/70R12, 145/65R13 Original wheels 12x4J +35 PCD 4H-100
-
JW2 1988/02–1990/03 Original tyre 145/70R12 Original wheels 12x4J +35 PCD 4H-100
-
JA1 1988/02–1990/03 Original tyre 145/70R12 Original wheels 12x4J +35 PCD 4H-100
SIZE GUIDE
トゥデイ tyre size guide
Original tyre and wheel sizes for the ホンダ トゥデイ by generation and grade (8 generations). On the latest JA5 (Jan 1993–Jun 1997), the original tyre is 145SR12 and the wheel is 12x4J +45.
BY GRADE
JA5 original sizes by grade
-
12 inch (145SR12)
10 variants
- Front & rear
- 145SR12 · 12x4J +45 Diameter 542.0mm
- Grade
- Qf, Qs, Qi ver2, Qi
INCH UP
If you go up in size
Sizes with a diameter close to the JA5 original 145SR12. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
13 inch
-
175/60R13
Diameter −1.8mm · guide 5J +40
-
165/65R13
Diameter +2.7mm · guide 4.5J +46
-
135/80R13
Diameter +4.2mm · guide 4.5J +46
14 inch
-
155/60R14
Diameter −0.4mm · guide 4.5J +46
-
145/65R14
Diameter +2.1mm · guide 4.5J +46
-
135/70R14
Diameter +2.6mm · guide 4.5J +46
FAQ
トゥデイ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the トゥデイ use?
On the latest JA5 (Jan 1993–Jun 1997), the original tyre on most grades is 145SR12. Sizes also vary by generation (year); 145/70R12, 145SR12, 155/65R13, 145/65R13, 155/70R12 have been used so far.
What are the original wheel size and PCD of the トゥデイ?
On the latest JA5 (Jan 1993–Jun 1997), the original wheel is 12x4J +45, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the トゥデイ for plus sizing?
To keep the diameter close to the original (145SR12), the calculated guide is 13 inch: 175/60R13, 14 inch: 155/60R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
How do I choose the offset for aftermarket wheels on the トゥデイ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →