Skip to main content

ランボルギーニ ガヤルド・スパイダー
original tyre and wheel sizes

Choose your generation to see original sizes by grade and calculate offset and protrusion.

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

Latest generation GECEHB (2011–)

Original 235/35 ZR19

See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.

BY GENERATION

Original sizes by generation

4 generations

SIZE GUIDE

ガヤルド・スパイダー tyre size guide

Original tyre and wheel sizes for the ランボルギーニ ガヤルド・スパイダー by generation and grade (4 generations). On the latest GECEHB (2011–), the original tyre is Front 235/35 ZR19, Rear 295/30 ZR19.

BY GRADE

GECEHB original sizes by grade

FAQ

ガヤルド・スパイダー tyre and wheel FAQ

Tap a question to show the answer.

What tyre size does the ガヤルド・スパイダー use?

On the latest GECEHB (2011–), the original tyre on most grades is Front 235/35 ZR19, Rear 295/30 ZR19. Sizes also vary by generation (year); 235/35 ZR19, 295/30 ZR19 have been used so far.

Which sizes suit the ガヤルド・スパイダー for plus sizing?

To keep the diameter close to the original (235/35 ZR19), the calculated guide is 20 inch: 235/30R20, 21 inch: 225/25R21. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.

Can the ガヤルド・スパイダー use smaller wheels for winter tyres?

At 18 inch, one inch smaller than the original (235/35 ZR19), sizes with a similar diameter are 235/40R18, 245/40R18, 225/45R18. On cars with large brakes (calipers) the wheel may foul them, so check fitment.

How do I choose the offset for aftermarket wheels on the ガヤルド・スパイダー?

In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.

Tyre basics (load index, date code, tread wear limits and more) →

TOP