ランボルギーニ
ウラカンfirst series Original tyre and wheel sizes and specifications
- 2014–2019
- 4 variants
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
STOCK SIZE
Original sizes
2 sizes depending on grade and year
Most common original size:
Front
Rear
- PCD and studs
- 5H-112
- Centre bore
- Not registered
- Wheel nut/bolt
- M14x1.5
If you go up in size
Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.
The original tyre size for the ランボルギーニ ウラカン (first series, 2014–2019) is Front 245/35 R19, Rear 305/35 R19, the wheel size is Front 19x8.5J +42, Rear 19x11J +40 (offset Front +42, Rear +40), the PCD is 5H-112. There are 2 original sizes depending on grade and year, including 245/35 R19, 305/35 R19, 245/30 R20, 305/30 R20.
BY GRADE
Original sizes by grade and year
4 variants · 2 original sizes
Unverified data extracted from sources (reference values). Sizes may differ by year and variant.
Source: Onyx Forged「Open atlas of original equipment wheel measurements(純正ホイール寸法のオープンアトラス)」 (CC BY 4.0), adapted. Data sources
This generation has 2 combinations of original tyres and wheels depending on grade and year. Choose the one that includes your car's grade and year (see “Matching variants” on each card).
-
Original 19 inch (245/35 R19, 305/35 R19)
Performante (470 kW, four-wheel drive), coupé and Spyder, LP 610-4 (449 kW, four-wheel drive) and LP 580-2 (426 kW, rear-wheel drive), coupé and Spyder · 2 variants
- Front
- Tyres
- 245/35 R19
- Wheel
- 19x8.5J +42
- Diameter
- 654.1 mm
- Rear
- Tyres
- 305/35 R19
- Wheel
- 19x11J +40
- Diameter
- 696.1 mm
PCD 5H-112 Centre bore Not registered Thread M14x1.5 Fastening type Bolt
Matching variants (2)
Variant / grade Model type code Sales period Displacement Seating capacity Fuel Performante (470 kW, four-wheel drive), coupé and Spyder — — — — — LP 610-4 (449 kW, four-wheel drive) and LP 580-2 (426 kW, rear-wheel drive), coupé and Spyder — — — — — -
Original 20 inch (245/30 R20, 305/30 R20)
Performante (470 kW, four-wheel drive), coupé and Spyder, LP 610-4 (449 kW, four-wheel drive) and LP 580-2 (426 kW, rear-wheel drive), coupé and Spyder · 2 variants
- Front
- Tyres
- 245/30 R20
- Wheel
- 20x8.5J +42
- Diameter
- 655.0 mm
- Rear
- Tyres
- 305/30 R20
- Wheel
- 20x11J +40
- Diameter
- 691.0 mm
PCD 5H-112 Centre bore Not registered Thread M14x1.5 Fastening type Bolt
Matching variants (2)
Variant / grade Model type code Sales period Displacement Seating capacity Fuel Performante (470 kW, four-wheel drive), coupé and Spyder — — — — — LP 610-4 (449 kW, four-wheel drive) and LP 580-2 (426 kW, rear-wheel drive), coupé and Spyder — — — — —
TAX & INSPECTION
Estimated tax and shaken (vehicle inspection) costs for the ウラカン
Estimated from the registered specifications of first series / Performante (470 kW, four-wheel drive), coupé and Spyder and the assumptions below.
These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.
- Automobile tax (annual)
- Check specifications
- Weight tax (2 years, standard rate)
- Check specifications
- Statutory shaken costs (reference)
- Enter conditions
Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.
Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.
Calculate tax and shaken costs for this specification →INCH UP
Plus-size guide for the ウラカン (first series)
Sizes with a diameter close to the original 245/35 R19 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.
| Diameter (in) | Tyre size | Diameter | Difference from original | Actual speed at indicated 40 km/h | Rim width guide |
|---|---|---|---|---|---|
| 20 inch | 245/30R20 | 655.0mm | +0.9mm (+0.14%) | 40.1km/h | 7–8.5J |
| 235/30R20 | 649.0mm | −5.1mm (−0.78%) | 39.7km/h | 6.5–8.5J | |
| 255/30R20 | 661.0mm | +6.9mm (+1.05%) | 40.4km/h | 7–9J | |
| 21 inch | 245/25R21 | 655.9mm | +1.8mm (+0.28%) | 40.1km/h | 7–8.5J |
| 235/25R21 | 650.9mm | −3.2mm (−0.49%) | 39.8km/h | 6.5–8.5J | |
| 255/25R21 | 660.9mm | +6.8mm (+1.04%) | 40.4km/h | 7–9J |
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 245/35 R19 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
18 inch
245/40R18
Diameter −0.9mm·guide 8.5J +42
-
18 inch
255/40R18
Diameter +7.1mm·guide 9J +43
-
18 inch
225/45R18
Diameter +5.6mm·guide 8J +35
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
ウラカン (first series) FAQ
Tap a question to show the answer.
What is the original tyre size for the ウラカン (first series)?
Front 245/35 R19, Rear 305/35 R19 on most grades. There are 2 sizes depending on grade and year: 245/35 R19, 305/35 R19, 245/30 R20, 305/30 R20. Check your car's grade and year in the list above.
What are the original wheel size, PCD and centre bore for the ウラカン (first series)?
Original wheel: Front 19x8.5J +42, Rear 19x11J +40, PCD: 5H-112, wheel nut/bolt thread: M14x1.5. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
What is the original wheel offset for the ウラカン (first series)?
The original Front 19x8.5J +42, Rear 19x11J +40 wheel has an offset of Front +42, Rear +40. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).
Which tyre sizes suit the ウラカン (first series) for plus sizing?
Sizes with a diameter close to the original (245/35 R19): 20 inch: 245/30R20 (diameter difference +0.1%), 21 inch: 245/25R21 (diameter difference +0.3%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.
When was the ウラカン (first series) sold, and which grades are listed?
Sold 2014–2019. 4 variants are listed (2 grades).
TOOLS FOR YOUR CAR
Use the tools with ウラカン data
Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.
OTHER MODELS