マツダ ボンゴ トラック
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation S403F (Sep 2020–present)
Original 175/80R14 · 14x5J +50
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
10 generations
-
S403F 2020/09–present Original tyre 175/80R14 Original wheels 14x5J +50 PCD 5H-114.3
-
S413F 2020/09–present Original tyre 175/80R14 Original wheels 14x5J +50 PCD 5H-114.3
-
SLP2T 2016/02–2020/08 Original tyre 185/80R14 Original wheels 14x5J +50 PCD 6H-114.3
-
SLP2L 2016/02–2020/08 Original tyre 185/80R14 Original wheels 14x5J +50 PCD 5H-114.3, 6H-114.3
-
SKP2T 2010/07–2016/01 Original tyre 165/R14-6PR, 145R12-6PR, 165R14-8PR Original wheels Front 14x4.5J +50, Rear 12x3.5J +87 PCD 5H-114.3
-
SKP2L 2010/07–2016/01 Original tyre 175/R14-6PR, 145R12-6PR, 175R14-6PR Original wheels Front 14x4.5J +50, Rear 12x3.5J +87 PCD 5H-114.3
-
SK82T 2007/08–2010/07 Original tyre 165/R14-6PR, 145R12-6PR, 165R14-8PR Original wheels Front 14x4.5J +50, Rear 12x3.5J +87 PCD 5H-114.3
-
SKF2T 2007/08–2010/07 Original tyre 145R12-6PR, 175/R14-6PR, 175/R14-8PR and more Original wheels Front 14x4.5J +50, Rear 12x3.5J +87 PCD 5H-114.3
-
SK82L 2007/08–2010/07 Original tyre 175/R14-6PR, 145R12-6PR, 175R14-6PR Original wheels Front 14x4.5J +50, Rear 12x3.5J +87 PCD 5H-114.3
-
SKF2L 2007/08–2010/07 Original tyre 175/R14-8PR, 175R14-8PR Original wheels 14x5J +50 PCD 5H-114.3
SIZE GUIDE
ボンゴ トラック tyre size guide
Original tyre and wheel sizes for the マツダ ボンゴ トラック by generation and grade (10 generations). On the latest S403F (Sep 2020–present), the original tyre is 175/80R14 and the wheel is 14x5J +50.
BY GRADE
S403F original sizes by grade
-
14 inch (175/80R14)
4 variants
- Front & rear
- 175/80R14 · 14x5J +50 Diameter 635.6mm
- Grade
- STD, DX
INCH UP
If you go up in size
Sizes with a diameter close to the S403F original 175/80R14. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
15 inch
-
195/65R15
Diameter −1.1mm · guide 5.5J +51
-
185/70R15
Diameter +4.4mm · guide 5.5J +51
-
175/75R15
Diameter +7.9mm · guide 5.5J +51
16 inch
-
175/65R16
Diameter −1.7mm · guide 5.5J +51
-
165/70R16
Diameter +1.8mm · guide 5.5J +51
-
205/55R16
Diameter −3.7mm · guide 5.5J +51
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 175/80R14 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
13 inch
185/85R13
Diameter +9.1mm·guide 5.5J +51
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
ボンゴ トラック tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the ボンゴ トラック use?
On the latest S403F (Sep 2020–present), the original tyre on most grades is 175/80R14. Sizes also vary by generation (year); 145R12-6PR, 175/R14-6PR, 175R14-6PR, 175/80R14, 185/80R14, 165/R14-6PR etc. have been used so far.
What are the original wheel size and PCD of the ボンゴ トラック?
On the latest S403F (Sep 2020–present), the original wheel is 14x5J +50, the PCD is 5H-114.3. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the ボンゴ トラック for plus sizing?
To keep the diameter close to the original (175/80R14), the calculated guide is 15 inch: 195/65R15, 16 inch: 175/65R16. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the ボンゴ トラック use smaller wheels for winter tyres?
At 13 inch, one inch smaller than the original (175/80R14), sizes with a similar diameter are 185/85R13. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the ボンゴ トラック?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →