マツダ ブローニィワゴン
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation SRE9W (Sep 1987–Jun 1995)
Original 185SR14 · 14x5J +40
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
2 generations
SIZE GUIDE
ブローニィワゴン tyre size guide
Original tyre and wheel sizes for the マツダ ブローニィワゴン by generation and grade (2 generations). On the latest SRE9W (Sep 1987–Jun 1995), the original tyre is 185SR14 and the wheel is 14x5J +40.
BY GRADE
SRE9W original sizes by grade
-
14 inch (185SR14)
14 variants
- Front & rear
- 185SR14 · 14x5J +40 Diameter 659.0mm
- Grade
- 4ドア・DX, 4ドア・GSX, 4ドア・リミテッド, DX・4ドア, GSX・4ドア, リミテッド・4ドア and more
INCH UP
If you go up in size
Sizes with a diameter close to the SRE9W original 185SR14. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
15 inch
-
185/75R15
Diameter −0.5mm · guide 5.5J +41
-
215/65R15
Diameter +1.5mm · guide 6J +35
-
175/80R15
Diameter +2.0mm · guide 5.5J +41
16 inch
-
195/65R16
Diameter +0.9mm · guide 5.5J +41
-
215/60R16
Diameter +5.4mm · guide 6J +35
-
185/70R16
Diameter +6.4mm · guide 5.5J +41
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 185SR14 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
13 inch
195/85R13
Diameter +2.7mm·guide 5.5J +41
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
ブローニィワゴン tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the ブローニィワゴン use?
On the latest SRE9W (Sep 1987–Jun 1995), the original tyre on most grades is 185SR14. Sizes also vary by generation (year); 185SR14 have been used so far.
What are the original wheel size and PCD of the ブローニィワゴン?
On the latest SRE9W (Sep 1987–Jun 1995), the original wheel is 14x5J +40, the PCD is 6H-139.7. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the ブローニィワゴン for plus sizing?
To keep the diameter close to the original (185SR14), the calculated guide is 15 inch: 185/75R15, 16 inch: 195/65R16. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the ブローニィワゴン use smaller wheels for winter tyres?
At 13 inch, one inch smaller than the original (185SR14), sizes with a similar diameter are 195/85R13. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the ブローニィワゴン?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →