マツダ クレフ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation GEEPA (May 1992–Dec 1994)
Original 195/65R14 · 14x5.5J +45
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
3 generations
SIZE GUIDE
クレフ tyre size guide
Original tyre and wheel sizes for the マツダ クレフ by generation and grade (3 generations). On the latest GEEPA (May 1992–Dec 1994), the original tyre is 195/65R14 and the wheel is 14x5.5J +45.
BY GRADE
GEEPA original sizes by grade
-
14 inch (195/65R14)
2 variants
- Front & rear
- 195/65R14 · 14x5.5J +45 Diameter 609.1mm
- Grade
- V6-2.0, V6-2.0 タイプLS
INCH UP
If you go up in size
Sizes with a diameter close to the GEEPA original 195/65R14. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
15 inch
-
205/55R15
Diameter −2.6mm · guide 6J +46
-
225/50R15
Diameter −3.1mm · guide 6J +46
-
195/60R15
Diameter +5.9mm · guide 6J +46
16 inch
-
225/45R16
Diameter −0.2mm · guide 6J +46
-
185/55R16
Diameter +0.8mm · guide 6J +46
-
205/50R16
Diameter +2.3mm · guide 6J +46
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 195/65R14 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
13 inch
195/70R13
Diameter −5.9mm·guide 6J +46
-
13 inch
185/75R13
Diameter −1.4mm·guide 6J +46
-
13 inch
205/70R13
Diameter +8.1mm·guide 6J +46
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
クレフ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the クレフ use?
On the latest GEEPA (May 1992–Dec 1994), the original tyre on most grades is 195/65R14. Sizes also vary by generation (year); 195/65R14, 185/70R14 have been used so far.
What are the original wheel size and PCD of the クレフ?
On the latest GEEPA (May 1992–Dec 1994), the original wheel is 14x5.5J +45, the PCD is 5H-114.3. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the クレフ for plus sizing?
To keep the diameter close to the original (195/65R14), the calculated guide is 15 inch: 205/55R15, 16 inch: 225/45R16. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the クレフ use smaller wheels for winter tyres?
At 13 inch, one inch smaller than the original (195/65R14), sizes with a similar diameter are 195/70R13, 185/75R13, 205/70R13. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the クレフ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →