ミツオカ ガリューII
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation MY34 (2004–)
Original 205/60R16 92H
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
2 generations
SIZE GUIDE
ガリューII tyre size guide
Original tyre and wheel sizes for the ミツオカ ガリューII by generation and grade (2 generations). On the latest MY34 (2004–), the original tyre is 205/60R16 92H.
BY GRADE
MY34 original sizes by grade
-
16 inch (205/60R16 92H)
2 variants
- Front & rear
- 205/60R16 92H Diameter 652.4mm
- Grade
- ファイナルモデル特別仕様車 本革パッケージ, スタンダード
FAQ
ガリューII tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the ガリューII use?
On the latest MY34 (2004–), the original tyre on most grades is 205/60R16 92H. Sizes also vary by generation (year); 205/60R16 92H have been used so far.
Which sizes suit the ガリューII for plus sizing?
To keep the diameter close to the original (205/60R16 92H), the calculated guide is 17 inch: 225/50R17, 18 inch: 195/50R18. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the ガリューII use smaller wheels for winter tyres?
At 15 inch, one inch smaller than the original (205/60R16 92H), sizes with a similar diameter are 205/65R15, 195/70R15, 215/65R15. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the ガリューII?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →