Skip to main content
Sedan illustration

Mitsuoka

GalueHK30 Original tyre and wheel sizes and specifications

  • 1996–
  • Saloon
  • 1,998cc
  • 2WD
  • 4AT, 5MT
  • 4 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Both axles

Tyres
185/70R14 88S
Diameter 614.6mm
Tyre list 37 models
PCD and studs
Not registered
Centre bore
Not registered

SPECS

Key specifications

Engine
RB20E 1,998cc
Max. power
130PS
Vehicle weight
1,285kg
Length × width × height
4,860×1,730×1,450mm
Seating capacity
5 seats

The original tyre size for the Mitsuoka Galue (HK30, 1996–) is 185/70R14 88S.

BY GRADE

Original sizes by grade and year

4 variants · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

Transmission
  1. Original 14 inch (185/70R14 88S)

    Standard, Deluxe · 4 variants · 1996/02–

    Both axles
    Tyres
    185/70R14 88S
    Wheel
    14 inch Rim width and offset not registered
    Diameter
    614.6 mm

    PCD Not registered Centre bore Not registered

    Matching variants (4)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel Engine / max. power Vehicle weight Battery
    Standard 5MT E-HK30 1996/02– 1,998 cc 5 seats Unleaded regular petrol RB20E 130PS (96kW)/5600rpm 1,285 kg —
    Standard 4AT E-HK30 1996/02– 1,998 cc 5 seats Unleaded regular petrol RB20E 130PS (96kW)/5600rpm 1,285 kg —
    Deluxe 5MT E-HK30 1996/02– 1,998 cc 5 seats Unleaded regular petrol RB20E 130PS (96kW)/5600rpm 1,285 kg —
    Deluxe 4AT E-HK30 1996/02– 1,998 cc 5 seats Unleaded regular petrol RB20E 130PS (96kW)/5600rpm 1,285 kg —

SPECS

Galue HK30 specifications

Basics

Sales period
1996–
Model code
E-HK30
Body type
Saloon
Drive
2WD
Transmission
4AT, 5MT
Seating capacity
5 seats

Engine and fuel economy

Engine code
RB20E
Engine
Water-cooled inline-6 OHC
Displacement
1,998cc
Max. power
130PS
Max. torque
171.6N·m
Fuel
Regular petrol

Dimensions and weight

Length × width × height
4,860×1,730×1,450mm
Wheelbase
2,665mm
Track front / rear
1,460mm / 1,400mm
Vehicle weight
1,285kg

Suspension

Suspension front / rear
Strut / 5-link coil
Brakes front / rear
Ventilated disc / Drum (leading/trailing)

Figures are ranges across the listed variants. Fuel economy is the catalogue figure (test cycle); new-car prices include tax.

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the Galue

Estimated from the registered specifications of HK30 / Standard (2WD, 5MT) and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
¥36,000
Weight tax (2 years, standard rate)
¥24,600
Statutory shaken costs (reference)
¥45,260

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

Catalogue by grade

Loading…

INCH UP

Plus-size guide for the Galue (HK30)

Sizes with a diameter close to the original 185/70R14 88S (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
15 inch 195/60R15 615.0mm +0.4mm (+0.07%) 40.0km/h 5.5–7J
215/55R15 617.5mm +2.9mm (+0.47%) 40.2km/h 6–7.5J
175/65R15 608.5mm −6.1mm (−0.99%) 39.6km/h 5–6J
16 inch 175/60R16 616.4mm +1.8mm (+0.29%) 40.1km/h 5–6J
205/50R16 611.4mm −3.2mm (−0.52%) 39.8km/h 5.5–7.5J
185/55R16 609.9mm −4.7mm (−0.76%) 39.7km/h 5–6.5J
See more sizes and products in plus-size options →

FAQ

Galue (HK30) FAQ

Tap a question to show the answer.

What is the original tyre size for the Galue (HK30)?

185/70R14 88S on most grades.

Which tyre sizes suit the Galue (HK30) for plus sizing?

Sizes with a diameter close to the original (185/70R14 88S): 15 inch: 195/60R15 (diameter difference +0.1%), 16 inch: 175/60R16 (diameter difference +0.3%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

What are the body dimensions (width) and weight of the Galue (HK30)?

Length 4,860mm, width 1,730mm, height 1,450mm, vehicle weight 1,285kg. Vehicle weight is a guide when choosing the tyre load index.

When was the Galue (HK30) sold, and which grades are listed?

Sold 1996–. 4 variants are listed (2 grades), drive: 2WD, transmission: 5MT, 4AT.

TOOLS FOR YOUR CAR

Use the tools with Galue data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other Galue generations

More Mitsuoka models →
TOP