Skip to main content

ミツオカ ヌエラ
original tyre and wheel sizes

Choose your generation to see original sizes by grade and calculate offset and protrusion.

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

Latest generation CL7 (2004–)

Original 195/65R15 91H

See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.

BY GENERATION

Original sizes by generation

3 generations

SIZE GUIDE

ヌエラ tyre size guide

Original tyre and wheel sizes for the ミツオカ ヌエラ by generation and grade (3 generations). On the latest CL7 (2004–), the original tyre is 195/65R15 91H.

BY GRADE

CL7 original sizes by grade

FAQ

ヌエラ tyre and wheel FAQ

Tap a question to show the answer.

What tyre size does the ヌエラ use?

On the latest CL7 (2004–), the original tyre on most grades is 195/65R15 91H. Sizes also vary by generation (year); 195/65R15 91H, 205/55R16 89V have been used so far.

Which sizes suit the ヌエラ for plus sizing?

To keep the diameter close to the original (195/65R15 91H), the calculated guide is 16 inch: 205/55R16, 17 inch: 225/45R17. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.

Can the ヌエラ use smaller wheels for winter tyres?

At 14 inch, one inch smaller than the original (195/65R15 91H), sizes with a similar diameter are 195/70R14, 185/75R14, 205/70R14. On cars with large brakes (calipers) the wheel may foul them, so check fitment.

How do I choose the offset for aftermarket wheels on the ヌエラ?

In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.

Tyre basics (load index, date code, tread wear limits and more) →

TOP