日産 クリッパー バン
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation DR18V (2026–)
Original 145/80R12
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
4 generations
-
DR18V 2026– Original tyre 145/80R12 Original wheels Not registered PCD Not registered
-
DR17V 2024/03–present Original tyre 145/80R12 Original wheels 12x4J +45 PCD 4H-100
-
U71V 2004/10–2012/01 Original tyre 145R12-6PR Original wheels 12x4J +38 PCD 4H-100
-
U72V 2004/10–2012/01 Original tyre 145R12-6PR Original wheels 12x4J +38 PCD 4H-100
SIZE GUIDE
クリッパー バン tyre size guide
Original tyre and wheel sizes for the 日産 クリッパー バン by generation and grade (4 generations). On the latest DR18V (2026–), the original tyre is 145/80R12.
BY GRADE
DR18V original sizes by grade
-
12 inch (145/80R12)
14 variants
- Front & rear
- 145/80R12 Diameter 536.8mm
- Grade
- DX, DX GLパッケージ, GX, GXターボ, GX マルチラック, GXターボ マルチラック
FAQ
クリッパー バン tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the クリッパー バン use?
On the latest DR18V (2026–), the original tyre on most grades is 145/80R12. Sizes also vary by generation (year); 145/80R12, 145R12-6PR have been used so far.
Which sizes suit the クリッパー バン for plus sizing?
To keep the diameter close to the original (145/80R12), the calculated guide is 13 inch: 175/60R13, 14 inch: 165/55R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
How do I choose the offset for aftermarket wheels on the クリッパー バン?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →