日産 マーチBOX
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation WK11 (Nov 1999–Apr 2001)
Original 155/70R13 · 13x5J +45
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
2 generations
SIZE GUIDE
マーチBOX tyre size guide
Original tyre and wheel sizes for the 日産 マーチBOX by generation and grade (2 generations). On the latest WK11 (Nov 1999–Apr 2001), the original tyre is 155/70R13 and the wheel is 13x5J +45.
BY GRADE
WK11 original sizes by grade
-
13 inch (155/70R13)
4 variants
- Front & rear
- 155/70R13 · 13x5J +45 Diameter 547.2mm
- Grade
- BOX(5ドア)
INCH UP
If you go up in size
Sizes with a diameter close to the WK11 original 155/70R13. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
14 inch
-
175/55R14
Diameter +0.9mm · guide 5.5J +46
-
145/65R14
Diameter −3.1mm · guide 5J +45
-
165/60R14
Diameter +6.4mm · guide 5.5J +46
15 inch
-
185/45R15
Diameter +0.3mm · guide 5.5J +46
-
165/50R15
Diameter −1.2mm · guide 5.5J +46
-
155/55R15
Diameter +4.3mm · guide 5.5J +46
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 155/70R13 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
12 inch
155/80R12
Diameter +5.6mm·guide 5.5J +46
-
12 inch
145/85R12
Diameter +4.1mm·guide 5J +45
-
12 inch
165/75R12
Diameter +5.1mm·guide 5.5J +46
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
マーチBOX tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the マーチBOX use?
On the latest WK11 (Nov 1999–Apr 2001), the original tyre on most grades is 155/70R13. Sizes also vary by generation (year); 155/70R13, 165/70R13 have been used so far.
What are the original wheel size and PCD of the マーチBOX?
On the latest WK11 (Nov 1999–Apr 2001), the original wheel is 13x5J +45, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the マーチBOX for plus sizing?
To keep the diameter close to the original (155/70R13), the calculated guide is 14 inch: 175/55R14, 15 inch: 185/45R15. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the マーチBOX use smaller wheels for winter tyres?
At 12 inch, one inch smaller than the original (155/70R13), sizes with a similar diameter are 155/80R12, 145/85R12, 165/75R12. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the マーチBOX?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →