Skip to main content
Coupe illustration

日産

スカイラインBCNR33 Original tyre and wheel sizes and specifications

  • 1995–
  • クーペ・スポーツ・スペシャリティ
  • 3 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Both axles

Tyres
245/45R17
Diameter 652.3mm
Tyre list 39 models
Wheel (diameter x width, offset)
17x9J +30
Matching wheels
PCD and studs
5H-114.3
Centre bore
Not registered

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

The original tyre size for the 日産 スカイライン (BCNR33, 1995–) is 245/45R17, the wheel size is 17x9J +30 (offset +30), the PCD is 5H-114.3.

BY GRADE

Original sizes by grade and year

3 variants · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

  1. Original 17 inch (245/45R17)

    標準 · 3 variants

    Both axles
    Tyres
    245/45R17
    Wheel
    17x9J +30
    Diameter
    652.3 mm

    PCD 5H-114.3 Centre bore Not registered

    Matching variants (3)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel
    標準 — — — — —
    標準 — — — — —
    標準 — — — — —

SPECS

スカイライン BCNR33 specifications

Basics

Sales period
1995–
Body type
クーペ・スポーツ・スペシャリティ

Engine and fuel economy

Engine
直列6気筒DOHC24バルブICツインターボ、水冷直列6気筒DOHC24バルブICツインターボ

Dimensions and weight

Wheelbase
2,720mm
Track front / rear
1,480mm / 1,490mm
Min. turning radius
5.7m

Suspension

Suspension front / rear
独立懸架マルチリンク式
Brakes front / rear
ベンチレーテッドディスク

Figures are ranges across the listed variants. Fuel economy is the catalogue figure (test cycle); new-car prices include tax.

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the スカイライン

Estimated from the registered specifications of BCNR33 / 標準 and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
Check specifications
Weight tax (2 years, standard rate)
Check specifications
Statutory shaken costs (reference)
Enter conditions

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

Catalogue by grade

Loading…

INCH UP

Plus-size guide for the スカイライン (BCNR33)

Sizes with a diameter close to the original 245/45R17 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
18 inch 245/40R18 653.2mm +0.9mm (+0.14%) 40.1km/h 7–8.5J
275/35R18 649.7mm −2.6mm (−0.40%) 39.8km/h 7.5–9.5J
255/40R18 661.2mm +8.9mm (+1.36%) 40.5km/h 7–9J
19 inch 245/35R19 654.1mm +1.8mm (+0.28%) 40.1km/h 7–8.5J
275/30R19 647.6mm −4.7mm (−0.72%) 39.7km/h 7.5–9.5J
235/35R19 647.1mm −5.2mm (−0.80%) 39.7km/h 6.5–8.5J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 245/45R17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

スカイライン (BCNR33) FAQ

Tap a question to show the answer.

What is the original tyre size for the スカイライン (BCNR33)?

245/45R17 on most grades.

What are the original wheel size, PCD and centre bore for the スカイライン (BCNR33)?

Original wheel: 17x9J +30, PCD: 5H-114.3. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the スカイライン (BCNR33)?

The original 17x9J +30 wheel has an offset of +30. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the スカイライン (BCNR33) for plus sizing?

Sizes with a diameter close to the original (245/45R17): 18 inch: 245/40R18 (diameter difference +0.1%), 19 inch: 245/35R19 (diameter difference +0.3%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the スカイライン (BCNR33) sold, and which grades are listed?

Sold 1995–. 3 variants are listed (1 grades).

TOOLS FOR YOUR CAR

Use the tools with スカイライン data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other スカイライン generations

More 日産 models →
TOP