Skip to main content
Convertible illustration

プジョー

307CCM307CC Original tyre and wheel sizes and specifications

  • 2004–
  • オープン・カブリオレ・コンバーチブル
  • 2 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Both axles

Tyres
205/50R17
Diameter 636.8mm
Tyre list 61 models
Wheel (diameter x width, offset)
17x6.5J +31
Matching wheels
PCD and studs
4H-108
Centre bore
Not registered

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

The original tyre size for the プジョー 307CC (M307CC, 2004–) is 205/50R17, the wheel size is 17x6.5J +31 (offset +31), the PCD is 4H-108.

BY GRADE

Original sizes by grade and year

2 variants · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

  1. Original 17 inch (205/50R17)

    標準 · 2 variants

    Both axles
    Tyres
    205/50R17
    Wheel
    17x6.5J +31
    Diameter
    636.8 mm

    PCD 4H-108 Centre bore Not registered

    Matching variants (2)

    Variant / grade Model type code Sales period Displacement Seating capacity Fuel
    標準 — — — — —
    標準 — — — — —

SPECS

307CC M307CC specifications

Basics

Sales period
2004–
Body type
オープン・カブリオレ・コンバーチブル

Engine and fuel economy

Engine
水冷直列4気筒DOHC

Dimensions and weight

Wheelbase
2,610mm
Track front / rear
1,500mm / 1,510mm
Min. turning radius
5.4m

Suspension

Suspension front / rear
マクファーソン・ストラット式(アンチロールバー付) / トーションビーム付トレーリングアーム式(アンチロールバー付)
Brakes front / rear
ベンチレーテッドディスク / ディスク

Figures are ranges across the listed variants. Fuel economy is the catalogue figure (test cycle); new-car prices include tax.

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the 307CC

Estimated from the registered specifications of M307CC / 標準 and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
Check specifications
Weight tax (2 years, standard rate)
Check specifications
Statutory shaken costs (reference)
Enter conditions

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

Catalogue by grade

Loading…

INCH UP

Plus-size guide for the 307CC (M307CC)

Sizes with a diameter close to the original 205/50R17 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
18 inch 225/40R18 637.2mm +0.4mm (+0.06%) 40.0km/h 6–8J
195/45R18 632.7mm −4.1mm (−0.64%) 39.7km/h 5.5–7J
205/45R18 641.7mm +4.9mm (+0.77%) 40.3km/h 5.5–7.5J
19 inch 195/40R19 638.6mm +1.8mm (+0.28%) 40.1km/h 5.5–7J
225/35R19 640.1mm +3.3mm (+0.52%) 40.2km/h 6–8J
215/35R19 633.1mm −3.7mm (−0.58%) 39.8km/h 6–7.5J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 205/50R17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

307CC (M307CC) FAQ

Tap a question to show the answer.

What is the original tyre size for the 307CC (M307CC)?

205/50R17 on most grades.

What are the original wheel size, PCD and centre bore for the 307CC (M307CC)?

Original wheel: 17x6.5J +31, PCD: 4H-108. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the 307CC (M307CC)?

The original 17x6.5J +31 wheel has an offset of +31. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the 307CC (M307CC) for plus sizing?

Sizes with a diameter close to the original (205/50R17): 18 inch: 225/40R18 (diameter difference +0.1%), 19 inch: 195/40R19 (diameter difference +0.3%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the 307CC (M307CC) sold, and which grades are listed?

Sold 2004–. 2 variants are listed (1 grades).

TOOLS FOR YOUR CAR

Use the tools with 307CC data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other 307CC generations

More プジョー models →
TOP