プジョー 308
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation P5YH01 (2026–)
Original 225/40 R18
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
20 generations
-
P5YH01 2026– Original tyre 225/40 R18 Original wheels Not registered PCD Not registered
-
P5HN09 2026– Original tyre 225/40R18 Original wheels 18x8J +48 PCD 5H-108
-
P51HN09 2025– Original tyre 225/40R18 Original wheels 18x8J +48 PCD 5H-108
-
P51YH01 2022– Original tyre 225/40R18, 225/45R17 Original wheels 18x8J +48 PCD 5H-108
-
P51HN05 2022– Original tyre 225/40R18, 225/45R17 Original wheels 18x8J +48 PCD 5H-108
-
T95G08 2020– Original tyre 235/35 ZR19 Original wheels Not registered PCD Not registered
-
T9WH01 2020– Original tyre 205/55 R16, 225/45 R17 Original wheels Not registered PCD Not registered
-
T9YH01 2018– Original tyre 205/55R16, 225/45R17, 225/40R18 Original wheels 17x7J +44 PCD 5H-108
-
T9HN05 2018– Original tyre 205/55R16, 225/40R18 Original wheels 16x7J +44 PCD 5H-108
-
T9BH01 2016– Original tyre 225/45R17, 205/55R16 Original wheels Not registered PCD 5H-108
-
T95G05 2016– Original tyre 235/35R19, 225/40R18 Original wheels Not registered PCD 5H-108
-
T9AH01 2016– Original tyre 225/40R18 Original wheels 18x8J +48 PCD 5H-108
-
T9HN02 2014– Original tyre 205/55R16, 225/45R17, 225/40R18 Original wheels 16x7J +44 PCD 5H-108
-
T75F01 2011– Original tyre 205/55R16 Original wheels 16x7J +32 PCD 4H-108
-
T75F02 2010– Original tyre 225/45R17, 205/55R16 Original wheels 17x7.5J +32 PCD 4H-108
-
T75F02S 2010– Original tyre 225/45R17, 205/55R16 Original wheels 17x7.5J +32 PCD 4H-108
-
T75FW 2009– Original tyre 205/55R16 Original wheels 16x7J +32 PCD 4H-108
-
T75FX 2009– Original tyre 205/55R16 Original wheels Not registered PCD 4H-108
-
T75FT 2008– Original tyre 205/55R16, 225/45R17 Original wheels Not registered PCD 4H-108
-
T75FY 2008– Original tyre 225/40R18 Original wheels 18x8J +34 PCD 4H-108
SIZE GUIDE
308 tyre size guide
Original tyre and wheel sizes for the プジョー 308 by generation and grade (20 generations). On the latest P5YH01 (2026–), the original tyre is 225/40 R18.
BY GRADE
P5YH01 original sizes by grade
-
18 inch (225/40 R18)
2 variants
- Front & rear
- 225/40 R18 Diameter 637.2mm
- Grade
- GT ブルーHDi, SW GT ブルーHDi
FAQ
308 tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the 308 use?
On the latest P5YH01 (2026–), the original tyre on most grades is 225/40 R18. Sizes also vary by generation (year); 225/40R18, 205/55R16, 225/45R17, 225/40 R18, 235/35 ZR19, 205/55 R16 etc. have been used so far.
Which sizes suit the 308 for plus sizing?
To keep the diameter close to the original (225/40 R18), the calculated guide is 19 inch: 255/30R19, 20 inch: 215/30R20. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the 308 use smaller wheels for winter tyres?
At 17 inch, one inch smaller than the original (225/40 R18), sizes with a similar diameter are 225/45R17, 235/45R17, 215/50R17. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the 308?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →