プジョー
407SWD2BR Original tyre and wheel sizes and specifications
- 2005–
- ワゴン
- 2 variants
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
STOCK SIZE
Original sizes
Original tyres and wheels used on most grades
Both axles
- PCD and studs
- 5H-108
- Centre bore
- Not registered
If you go up in size
Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.
The original tyre size for the プジョー 407SW (D2BR, 2005–) is 215/55R17, the wheel size is 17x7J +48 (offset +48), the PCD is 5H-108.
BY GRADE
Original sizes by grade and year
2 variants · 1 original size
Unverified data extracted from sources (reference values). Sizes may differ by year and variant.
-
Original 17 inch (215/55R17)
標準 · 2 variants
- Both axles
- Tyres
- 215/55R17
- Wheel
- 17x7J +48
- Diameter
- 668.3 mm
PCD 5H-108 Centre bore Not registered
Matching variants (2)
Variant / grade Model type code Sales period Displacement Seating capacity Fuel 標準 — — — — — 標準 — — — — —
SPECS
407SW D2BR specifications
Basics
- Sales period
- 2005–
- Body type
- ワゴン
Engine and fuel economy
- Engine
- 直列4気筒DOHC
Dimensions and weight
- Wheelbase
- 2,725mm
- Track front / rear
- 1,555mm / 1,510mm
- Min. turning radius
- 5.8m
Suspension
- Suspension front / rear
- ダブルウィッシュボーン式 / マルチリンク式
- Brakes front / rear
- ベンチレーテッドディスク / ディスク
Figures are ranges across the listed variants. Fuel economy is the catalogue figure (test cycle); new-car prices include tax.
TAX & INSPECTION
Estimated tax and shaken (vehicle inspection) costs for the 407SW
Estimated from the registered specifications of D2BR / 標準 and the assumptions below.
These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.
- Automobile tax (annual)
- Check specifications
- Weight tax (2 years, standard rate)
- Check specifications
- Statutory shaken costs (reference)
- Enter conditions
Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.
Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.
Calculate tax and shaken costs for this specification →Catalogue by grade
Loading…
INCH UP
Plus-size guide for the 407SW (D2BR)
Sizes with a diameter close to the original 215/55R17 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.
| Diameter (in) | Tyre size | Diameter | Difference from original | Actual speed at indicated 40 km/h | Rim width guide |
|---|---|---|---|---|---|
| 18 inch | 235/45R18 | 668.7mm | +0.4mm (+0.06%) | 40.0km/h | 6.5–8.5J |
| 215/50R18 | 672.2mm | +3.9mm (+0.58%) | 40.2km/h | 6–7.5J | |
| 205/50R18 | 662.2mm | −6.1mm (−0.91%) | 39.6km/h | 5.5–7.5J | |
| 19 inch | 205/45R19 | 667.1mm | −1.2mm (−0.18%) | 39.9km/h | 5.5–7.5J |
| 235/40R19 | 670.6mm | +2.3mm (+0.34%) | 40.1km/h | 6.5–8.5J | |
| 225/40R19 | 662.6mm | −5.7mm (−0.85%) | 39.7km/h | 6–8J |
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 215/55R17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
16 inch
215/60R16
Diameter −3.9mm·guide 7.5J +49
-
16 inch
205/65R16
Diameter +4.6mm·guide 7.5J +49
-
16 inch
225/60R16
Diameter +8.1mm·guide 7.5J +49
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
407SW (D2BR) FAQ
Tap a question to show the answer.
What is the original tyre size for the 407SW (D2BR)?
215/55R17 on most grades.
What are the original wheel size, PCD and centre bore for the 407SW (D2BR)?
Original wheel: 17x7J +48, PCD: 5H-108. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
What is the original wheel offset for the 407SW (D2BR)?
The original 17x7J +48 wheel has an offset of +48. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).
Which tyre sizes suit the 407SW (D2BR) for plus sizing?
Sizes with a diameter close to the original (215/55R17): 18 inch: 235/45R18 (diameter difference +0.1%), 19 inch: 205/45R19 (diameter difference −0.2%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.
When was the 407SW (D2BR) sold, and which grades are listed?
Sold 2005–. 2 variants are listed (1 grades).
TOOLS FOR YOUR CAR
Use the tools with 407SW data
Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.
OTHER MODELS