Skip to main content
Sedan illustration

ポルシェ

911G-model Original tyre and wheel sizes, with offset calculator

  • 1974–1989
  • 4 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

4 sizes depending on grade and year

Most common original size:

Front

Tyres
205/55 ZR16
Diameter 631.9mm
Tyre list 89 models
Wheel (diameter x width, offset)
16x6J +36
Matching wheels

Rear

Tyres
225/50 ZR16
Diameter 631.4mm
Tyre list 18 models
PCD and studs
5H-130
Centre bore
71.6mm
Wheel nut/bolt
M14x1.5

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

SPECS

Key specifications

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Engine
Coming soon
Max. power
Coming soon
Vehicle weight
Coming soon
Length × width × height
Coming soon
Seating capacity
Coming soon
New-car price
Coming soon

The original tyre size for the ポルシェ 911 (G-model, 1974–1989) is Front 205/55 ZR16, Rear 225/50 ZR16, the wheel size is 16x6J +36 (offset +36), the PCD is 5H-130, the centre bore is 71.6mm. There are 4 original sizes depending on grade and year, including 205/55 ZR16, 185/70 R15, 225/50 ZR16, 245/45 ZR16 etc..

BY GRADE

Original sizes by grade and year

4 variants · 4 original sizes

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

Source: Onyx Forged「Open atlas of original equipment wheel measurements(純正ホイール寸法のオープンアトラス)」 (CC BY 4.0), adapted. Data sources

This generation has 4 combinations of original tyres and wheels depending on grade and year. Choose the one that includes your car's grade and year (see “Matching variants” on each card).

  1. Original 16 inch (205/55 ZR16, 225/50 ZR16)

    911, 911 SC and Carrera 3.2 (from model year 1969) · 1 variant

    Front
    Tyres
    205/55 ZR16
    Wheel
    16x6J +36
    Diameter
    631.9 mm
    Rear
    Tyres
    225/50 ZR16
    Wheel
    16 inch Rim width and offset not registered
    Diameter
    631.4 mm

    PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m

    Matching variants (1)

    Variant / grade Model type code Sales period
    911, 911 SC and Carrera 3.2 (from model year 1969) — —
  2. Original 16 inch (205/55 ZR16, 245/45 ZR16)

    911 Turbo (930) and 911 Carrera “Turbo-look” · 1 variant

    Front
    Tyres
    205/55 ZR16
    Wheel
    16 inch Rim width and offset not registered
    Diameter
    631.9 mm
    Rear
    Tyres
    245/45 ZR16
    Wheel
    16x9J +15
    Diameter
    626.9 mm

    PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m

    Matching variants (1)

    Variant / grade Model type code Sales period
    911 Turbo (930) and 911 Carrera “Turbo-look” — —
  3. Original 15 inch (185/70 R15)

    911, 911 SC and Carrera 3.2 (from model year 1969) · 1 variant

    Both axles
    Tyres
    185/70 R15
    Wheel
    15x6J +36
    Diameter
    640.0 mm

    PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m

    Matching variants (1)

    Variant / grade Model type code Sales period
    911, 911 SC and Carrera 3.2 (from model year 1969) — —
  4. Original 15 inch (185/70 R15, 215/60 R15)

    911, 911 SC and Carrera 3.2 (from model year 1969) · 1 variant

    Front
    Tyres
    185/70 R15
    Wheel
    15x6J +36
    Diameter
    640.0 mm
    Rear
    Tyres
    215/60 R15
    Wheel
    15 inch Rim width and offset not registered
    Diameter
    639.0 mm

    PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m

    Matching variants (1)

    Variant / grade Model type code Sales period
    911, 911 SC and Carrera 3.2 (from model year 1969) — —

SPECS

Vehicle data and key specifications

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Basics

Sales period
Coming soon

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the 911

Estimated from the registered specifications of G-model / 911, 911 SC and Carrera 3.2 (from model year 1969) and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
Check specifications
Weight tax (2 years, standard rate)
Check specifications
Statutory shaken costs (reference)
Enter conditions

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

CATALOG

Catalogue and equipment by grade

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Release date Coming soon

  • Grade A (sample)

    Transmission · drive · engine

    Coming soon
  • Grade B (sample)

    Transmission · drive · engine

    Coming soon
  • Grade C (sample)

    Transmission · drive · engine

    Coming soon

INCH UP

Plus-size guide for the 911 (G-model)

Sizes with a diameter close to the original 205/55 ZR16 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
17 inch 225/45R17 634.3mm +2.4mm (+0.38%) 40.2km/h 6–8J
205/50R17 636.8mm +4.9mm (+0.78%) 40.3km/h 5.5–7.5J
195/50R17 626.8mm −5.1mm (−0.81%) 39.7km/h 5.5–7J
18 inch 195/45R18 632.7mm +0.8mm (+0.13%) 40.1km/h 5.5–7J
215/40R18 629.2mm −2.7mm (−0.43%) 39.8km/h 6–7.5J
225/40R18 637.2mm +5.3mm (+0.84%) 40.3km/h 6–8J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 205/55 ZR16 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

911 (G-model) FAQ

Tap a question to show the answer.

What is the original tyre size for the 911 (G-model)?

Front 205/55 ZR16, Rear 225/50 ZR16 on most grades. There are 4 sizes depending on grade and year: 205/55 ZR16, 185/70 R15, 225/50 ZR16, 245/45 ZR16, 215/60 R15. Check your car's grade and year in the list above.

What are the original wheel size, PCD and centre bore for the 911 (G-model)?

Original wheel: 16x6J +36, PCD: 5H-130, centre bore: 71.6mm, wheel nut/bolt thread: M14x1.5. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the 911 (G-model)?

The original 16x6J +36 wheel has an offset of +36. Some grades and years use +15. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the 911 (G-model) for plus sizing?

Sizes with a diameter close to the original (205/55 ZR16): 17 inch: 225/45R17 (diameter difference +0.4%), 18 inch: 195/45R18 (diameter difference +0.1%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the 911 (G-model) sold, and which grades are listed?

Sold 1974–1989. 4 variants are listed (2 grades).

TOOLS FOR YOUR CAR

Use the tools with 911 data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

OTHER MODELS

Other 911 generations

More ポルシェ models →
TOP