ポルシェ
944second series Original tyre and wheel sizes, with offset calculator
- 1987–1991
- 5 variants
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
STOCK SIZE
Original sizes
4 sizes depending on grade and year
- 17 inch (225/45 ZR17, 255/40 ZR17) 2 variants
- 16 inch (225/50 ZR16, 245/45 ZR16) 1 variant
- 16 inch (205/55 R16, 225/50 R16) 1 variant
- 15 inch (195/65 R15) 1 variant
Most common original size:
Front
Rear
- PCD and studs
- 5H-130
- Centre bore
- 71.6mm
- Wheel nut/bolt
- M14x1.5
If you go up in size
Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.
SPECS
Key specifications
Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.
- Engine
- Coming soon
- Max. power
- Coming soon
- Vehicle weight
- Coming soon
- Length × width × height
- Coming soon
- Seating capacity
- Coming soon
- New-car price
- Coming soon
The original tyre size for the ポルシェ 944 (second series, 1987–1991) is Front 225/45 ZR17, Rear 255/40 ZR17, the wheel size is Front 17x8J +52, Rear 17x9.5J +68 (offset Front +52, Rear +68), the PCD is 5H-130, the centre bore is 71.6mm. There are 4 original sizes depending on grade and year, including 225/45 ZR17, 255/40 ZR17, 225/50 ZR16, 245/45 ZR16 etc..
BY GRADE
Original sizes by grade and year
5 variants · 4 original sizes
Unverified data extracted from sources (reference values). Sizes may differ by year and variant.
Source: Onyx Forged「Open atlas of original equipment wheel measurements(純正ホイール寸法のオープンアトラス)」 (CC BY 4.0), adapted. Data sources
This generation has 4 combinations of original tyres and wheels depending on grade and year. Choose the one that includes your car's grade and year (see “Matching variants” on each card).
-
Original 17 inch (225/45 ZR17, 255/40 ZR17)
944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis, 944 Turbo (184 kW) and 944 S2 with R01 chassis · 2 variants
- Front
- Tyres
- 225/45 ZR17
- Wheel
- 17x8J +52
- Diameter
- 634.3 mm
- Rear
- Tyres
- 255/40 ZR17
- Wheel
- 17x9.5J +68
- Diameter
- 635.8 mm
PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m
Matching variants (2)
Variant / grade Model type code Sales period 944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis — — 944 Turbo (184 kW) and 944 S2 with R01 chassis — — -
Original 16 inch (225/50 ZR16, 245/45 ZR16)
944 Turbo (184 kW) and 944 S2 with R01 chassis · 1 variant
- Front
- Tyres
- 225/50 ZR16
- Wheel
- 16x7J +65
- Diameter
- 631.4 mm
- Rear
- Tyres
- 245/45 ZR16
- Wheel
- 16x9J +60
- Diameter
- 626.9 mm
PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m
Matching variants (1)
Variant / grade Model type code Sales period 944 Turbo (184 kW) and 944 S2 with R01 chassis — — -
Original 16 inch (205/55 R16, 225/50 R16)
944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis · 1 variant
- Front
- Tyres
- 205/55 R16
- Wheel
- 16 inch Rim width and offset not registered
- Diameter
- 631.9 mm
- Rear
- Tyres
- 225/50 R16
- Wheel
- 16 inch Rim width and offset not registered
- Diameter
- 631.4 mm
PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m
Matching variants (1)
Variant / grade Model type code Sales period 944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis — — -
Original 15 inch (195/65 R15)
944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis · 1 variant
- Both axles
- Tyres
- 195/65 R15
- Wheel
- 15 inch Rim width and offset not registered
- Diameter
- 634.5 mm
PCD 5H-130 Centre bore 71.6 mm Thread M14x1.5 Fastening type Nut Tightening torque 130 N·m
Matching variants (1)
Variant / grade Model type code Sales period 944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis — —
SPECS
Vehicle data and key specifications
Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.
Basics
- Sales period
- Coming soon
TAX & INSPECTION
Estimated tax and shaken (vehicle inspection) costs for the 944
Estimated from the registered specifications of second series / 944, 944 S, 944 Turbo (162 kW) and 944 S2 with standard chassis and the assumptions below.
These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.
- Automobile tax (annual)
- Check specifications
- Weight tax (2 years, standard rate)
- Check specifications
- Statutory shaken costs (reference)
- Enter conditions
Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.
Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.
Calculate tax and shaken costs for this specification →CATALOG
Catalogue and equipment by grade
Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.
Release date Coming soon
-
Coming soon
Grade A (sample)
Transmission · drive · engine
-
Coming soon
Grade B (sample)
Transmission · drive · engine
-
Coming soon
Grade C (sample)
Transmission · drive · engine
Grade details (sample)
- Key specifications
- Detailed specifications
- Equipment
- Colours
- Model code
- Coming soon
- Drive
- Coming soon
- Transmission
- Coming soon
- Engine code
- Coming soon
- Displacement
- Coming soon
- Vehicle weight
- Coming soon
- New-car price
- Coming soon
INCH UP
Plus-size guide for the 944 (second series)
Sizes with a diameter close to the original 225/45 ZR17 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.
| Diameter (in) | Tyre size | Diameter | Difference from original | Actual speed at indicated 40 km/h | Rim width guide |
|---|---|---|---|---|---|
| 18 inch | 255/35R18 | 635.7mm | +1.4mm (+0.22%) | 40.1km/h | 7–9J |
| 225/40R18 | 637.2mm | +2.9mm (+0.46%) | 40.2km/h | 6–8J | |
| 215/40R18 | 629.2mm | −5.1mm (−0.80%) | 39.7km/h | 6–7.5J | |
| 19 inch | 215/35R19 | 633.1mm | −1.2mm (−0.19%) | 39.9km/h | 6–7.5J |
| 255/30R19 | 635.6mm | +1.3mm (+0.20%) | 40.1km/h | 7–9J | |
| 245/30R19 | 629.6mm | −4.7mm (−0.74%) | 39.7km/h | 7–8.5J |
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 225/45 ZR17 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
16 inch
225/50R16
Diameter −2.9mm·guide 8J +52
-
16 inch
235/50R16
Diameter +7.1mm·guide 8.5J +53
-
16 inch
215/55R16
Diameter +8.6mm·guide 7.5J +45
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
944 (second series) FAQ
Tap a question to show the answer.
What is the original tyre size for the 944 (second series)?
Front 225/45 ZR17, Rear 255/40 ZR17 on most grades. There are 4 sizes depending on grade and year: 225/45 ZR17, 255/40 ZR17, 225/50 ZR16, 245/45 ZR16, 205/55 R16, 225/50 R16, 195/65 R15. Check your car's grade and year in the list above.
What are the original wheel size, PCD and centre bore for the 944 (second series)?
Original wheel: Front 17x8J +52, Rear 17x9.5J +68, PCD: 5H-130, centre bore: 71.6mm, wheel nut/bolt thread: M14x1.5. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
What is the original wheel offset for the 944 (second series)?
The original Front 17x8J +52, Rear 17x9.5J +68 wheel has an offset of Front +52, Rear +68. Some grades and years use +65, +60. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).
Which tyre sizes suit the 944 (second series) for plus sizing?
Sizes with a diameter close to the original (225/45 ZR17): 18 inch: 255/35R18 (diameter difference +0.2%), 19 inch: 215/35R19 (diameter difference −0.2%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.
When was the 944 (second series) sold, and which grades are listed?
Sold 1987–1991. 5 variants are listed (2 grades).
TOOLS FOR YOUR CAR
Use the tools with 944 data
Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.
OTHER MODELS