スバル インプレッサ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation GDC (2006–)
Original 205/50R16 · 16x6.5J +55
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
10 generations
-
GDC 2006– Original tyre 205/50R16, 175/70R14 Original wheels 16x6.5J +55 PCD 5H-100
-
GDD 2006– Original tyre 205/50R16, 175/70R14 Original wheels 16x6.5J +55 PCD 5H-100
-
GD2 2003– Original tyre 175/70R14, 195/60R15 Original wheels 15x6J +55 PCD 5H-100
-
GD3 2003– Original tyre 175/70R14, 195/60R15 Original wheels 15x6J +55 PCD 5H-100
-
GDA 2000– Original tyre 215/45R17, 205/50R16 Original wheels 17x7J +55 PCD 5H-100
-
GD9 2000– Original tyre 195/60R15 Original wheels 15x6J +55 PCD 5H-100
-
GC2 1996– Original tyre 175/70R14 Original wheels Front 14x6J +55, Rear 14x5.5J +55 PCD 5H-100
-
GC1 1992– Original tyre 175/70R14 Original wheels Front 14x6J +55, Rear 14x5.5J +55 PCD 5H-100
-
GC6 1992– Original tyre 195/60R15, 185/70R14 Original wheels 15x6J +55 PCD 5H-100
-
GC8 1992– Original tyre 205/50R16, 195/60R15, 205/55R15 Original wheels 16x6.5J +55 PCD 5H-100
SIZE GUIDE
インプレッサ tyre size guide
Original tyre and wheel sizes for the スバル インプレッサ by generation and grade (10 generations). On the latest GDC (2006–), the original tyre is 205/50R16 and the wheel is 16x6.5J +55.
BY GRADE
GDC original sizes by grade
-
16 inch (205/50R16)
2 variants
- Front & rear
- 205/50R16 · 16x6.5J +55 Diameter 611.4mm
- Grade
- 標準
-
14 inch (175/70R14)
1 variant
- Front & rear
- 175/70R14 · 14x5.5J +55 Diameter 600.6mm
- Grade
- 標準
INCH UP
If you go up in size
Sizes with a diameter close to the GDC original 205/50R16. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
17 inch
-
225/40R17
Diameter +0.4mm · guide 7J +56
-
195/45R17
Diameter −4.1mm · guide 7J +56
-
205/45R17
Diameter +4.9mm · guide 7J +56
18 inch
-
195/40R18
Diameter +1.8mm · guide 7J +56
-
225/35R18
Diameter +3.3mm · guide 7J +56
-
215/35R18
Diameter −3.7mm · guide 7J +56
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 205/50R16 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
15 inch
205/55R15
Diameter −4.9mm·guide 7J +56
-
15 inch
195/60R15
Diameter +3.6mm·guide 7J +56
-
15 inch
215/55R15
Diameter +6.1mm·guide 7J +56
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
インプレッサ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the インプレッサ use?
On the latest GDC (2006–), the original tyre on most grades is 205/50R16. There are 2 sizes depending on grade: 205/50R16, 175/70R14. Sizes also vary by generation (year); 175/70R14, 195/60R15, 205/50R16, 215/45R17, 185/70R14, 205/55R15 have been used so far.
What are the original wheel size and PCD of the インプレッサ?
On the latest GDC (2006–), the original wheel is 16x6.5J +55, the PCD is 5H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the インプレッサ for plus sizing?
To keep the diameter close to the original (205/50R16), the calculated guide is 17 inch: 225/40R17, 18 inch: 195/40R18. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the インプレッサ use smaller wheels for winter tyres?
At 15 inch, one inch smaller than the original (205/50R16), sizes with a similar diameter are 205/55R15, 195/60R15, 215/55R15. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the インプレッサ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →