スバル サンバー トライ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation KV3 (Mar 1990–Oct 1992)
Original 145SR12 · 12x4J +45
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
5 generations
-
KV3 1990/03–1992/10 Original tyre 145SR12, 155SR12 Original wheels 12x4J +45 PCD 4H-100
-
KV4 1990/03–1992/10 Original tyre 155SR12, 145SR12 Original wheels 12x4J +45 PCD 4H-100
-
KR6 1989/10–1990/03 Original tyre 145SR12 Original wheels 12x3.5J +45 PCD 4H-100
-
KR5 1989/04–1990/03 Original tyre 145SR12 Original wheels 12x3.5J +45 PCD 4H-100
-
KR1 1989/04–1990/03 Original tyre 145SR12 Original wheels 12x3.5J +45 PCD 4H-100
SIZE GUIDE
サンバー トライ tyre size guide
Original tyre and wheel sizes for the スバル サンバー トライ by generation and grade (5 generations). On the latest KV3 (Mar 1990–Oct 1992), the original tyre is 145SR12 and the wheel is 12x4J +45.
BY GRADE
KV3 original sizes by grade
-
12 inch (145SR12)
13 variants
- Front & rear
- 145SR12 · 12x4J +45 Diameter 542.0mm
- Grade
- ディアス プラスE サンサンルーフ・5ドア, ディアス プラスS サンサンルーフ・5ドア, RJエクストラ-S・5ドア, RJ・5ドア, ディアス サンサンルーフ・5ドア, 5ドア・ディアス プラスS サンサンルーフ and more
-
12 inch (155SR12)
11 variants
- Front & rear
- 155SR12 · 12x4J +45 Diameter 559.0mm
- Grade
- XS スーパーチャージャー・5ドア, ディアスⅡ スーパーチャージャー サンサンルーフ・5ドア, 5ドア・ディアスⅡ スーパーチャージャー サンサンルーフ, 5ドア・XS スーパーチャージャー, 5ドア・ディアスⅡ スーパーチャージャー, 5ドア・XV スーパーチャージャー
INCH UP
If you go up in size
Sizes with a diameter close to the KV3 original 145SR12. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
13 inch
-
175/60R13
Diameter −1.8mm · guide 5J +40
-
165/65R13
Diameter +2.7mm · guide 4.5J +46
-
135/80R13
Diameter +4.2mm · guide 4.5J +46
14 inch
-
155/60R14
Diameter −0.4mm · guide 4.5J +46
-
145/65R14
Diameter +2.1mm · guide 4.5J +46
-
135/70R14
Diameter +2.6mm · guide 4.5J +46
FAQ
サンバー トライ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the サンバー トライ use?
On the latest KV3 (Mar 1990–Oct 1992), the original tyre on most grades is 145SR12. There are 2 sizes depending on grade: 145SR12, 155SR12. Sizes also vary by generation (year); 145SR12, 155SR12 have been used so far.
What are the original wheel size and PCD of the サンバー トライ?
On the latest KV3 (Mar 1990–Oct 1992), the original wheel is 12x4J +45, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the サンバー トライ for plus sizing?
To keep the diameter close to the original (145SR12), the calculated guide is 13 inch: 175/60R13, 14 inch: 155/60R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
How do I choose the offset for aftermarket wheels on the サンバー トライ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →