スズキ キャリィ
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation DA16T (Apr 2022–present)
Original 145/80R12 · 12x3.5J +45
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
10 generations
-
DA16T 2022/04–present Original tyre 145/80R12 Original wheels 12x3.5J +45 PCD 4H-100
-
DA65T 2005/11–present Original tyre 145R12-6PR Original wheels 12x4J +45 PCD 4H-100
-
DA63T 2005/08–2013/08 Original tyre 145R12-6PR Original wheels 12x4J +45 PCD 4H-100
-
DA62T 2001/09–2005/08 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-100
-
DA52T 1999/01–2001/09 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-100
-
DB52T 1999/01–2001/09 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-100
-
DC51T 1991/09–1998/12 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-114.3, 4H-100
-
DD51T 1991/09–1998/12 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-114.3, 4H-100
-
DC51B(改) 1991/09–1997/03 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-114.3, 4H-100
-
DD51B(改) 1991/09–1997/03 Original tyre 145R12 Original wheels 12x4J +45 PCD 4H-114.3, 4H-100
SIZE GUIDE
キャリィ tyre size guide
Original tyre and wheel sizes for the スズキ キャリィ by generation and grade (10 generations). On the latest DA16T (Apr 2022–present), the original tyre is 145/80R12 and the wheel is 12x3.5J +45.
BY GRADE
DA16T original sizes by grade
-
12 inch (145/80R12)
41 variants · PCD 4H-100
- Front & rear
- 145/80R12 · 12x3.5J +45 Diameter 536.8mm
- Grade
- KC エアコンパワステ(スズキセフティサポート非装着車), KC エアコンパワステ, KX, KC エアコンパワステ 農繁, KC, KC エアコンパワステ(セーフティサポート付) and more
-
12 inch (145/80R12)
23 variants · PCD 4H-100 / Centre bore 60
- Front & rear
- 145/80R12 · 12x3.5J +45 Diameter 536.8mm
- Grade
- KC, KX, KC農繁, KC エアコンパワステ(スズキセフティサポート非装着車), KC エアコンパワステ, KC エアコンパワステ 農繁(スズキセフティサポート非装着車) and more
INCH UP
If you go up in size
Sizes with a diameter close to the DA16T original 145/80R12. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
13 inch
-
175/60R13
Diameter +3.4mm · guide 5J +33
-
145/70R13
Diameter −3.6mm · guide 4J +46
-
135/75R13
Diameter −4.1mm · guide 4J +46
14 inch
-
165/55R14
Diameter +0.3mm · guide 4.5J +40
-
155/60R14
Diameter +4.8mm · guide 4.5J +40
-
145/65R14
Diameter +7.3mm · guide 4J +46
FAQ
キャリィ tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the キャリィ use?
On the latest DA16T (Apr 2022–present), the original tyre on most grades is 145/80R12. There are 2 sizes depending on grade: 145/80R12. Sizes also vary by generation (year); 145R12, 145R12-6PR, 145/80R12 have been used so far.
What are the original wheel size and PCD of the キャリィ?
On the latest DA16T (Apr 2022–present), the original wheel is 12x3.5J +45, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the キャリィ for plus sizing?
To keep the diameter close to the original (145/80R12), the calculated guide is 13 inch: 175/60R13, 14 inch: 165/55R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
How do I choose the offset for aftermarket wheels on the キャリィ?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →