Skip to main content

スズキ エブリィ
original tyre and wheel sizes

Choose your generation to see original sizes by grade and calculate offset and protrusion.

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

Latest generation DA18V (May 2026–present)

Original 145/80R12 · 12x4J +45

See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.

BY GENERATION

Original sizes by generation

12 generations

SIZE GUIDE

エブリィ tyre size guide

Original tyre and wheel sizes for the スズキ エブリィ by generation and grade (12 generations). On the latest DA18V (May 2026–present), the original tyre is 145/80R12 and the wheel is 12x4J +45.

BY GRADE

DA18V original sizes by grade

INCH UP

If you go up in size

Sizes with a diameter close to the DA18V original 145/80R12. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.

13 inch

14 inch

FAQ

エブリィ tyre and wheel FAQ

Tap a question to show the answer.

What tyre size does the エブリィ use?

On the latest DA18V (May 2026–present), the original tyre on most grades is 145/80R12. Sizes also vary by generation (year); 145R12, 4.50R12, 145/80R12, 155/70R13, 5.00R10, 5.00R12 etc. have been used so far.

What are the original wheel size and PCD of the エブリィ?

On the latest DA18V (May 2026–present), the original wheel is 12x4J +45, the PCD is 4H-100. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

Which sizes suit the エブリィ for plus sizing?

To keep the diameter close to the original (145/80R12), the calculated guide is 13 inch: 175/60R13, 14 inch: 165/55R14. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.

How do I choose the offset for aftermarket wheels on the エブリィ?

In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.

Tyre basics (load index, date code, tread wear limits and more) →

TOP