Skip to main content
Sedan illustration

アルピーヌ

A290first generation Original tyre and wheel sizes, with offset calculator

  • 2024–
  • 1 variant
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Both axles

Tyres
225/40 R19
Diameter 662.6mm
Tyre list 39 models
Wheel (diameter x width, offset)
19x8J +30
Matching wheels
PCD and studs
5H-114.3
Centre bore
66.1mm
Wheel nut/bolt
M12x1.5

If you go up in size

Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.

SPECS

Key specifications

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Engine
Coming soon
Max. power
Coming soon
Vehicle weight
Coming soon
Length × width × height
Coming soon
Seating capacity
Coming soon
New-car price
Coming soon

The original tyre size for the アルピーヌ A290 (first generation, 2024–) is 225/40 R19, the wheel size is 19x8J +30 (offset +30), the PCD is 5H-114.3, the centre bore is 66.1mm.

BY GRADE

Original sizes by grade and year

1 variant · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

Source: Onyx Forged「Open atlas of original equipment wheel measurements(純正ホイール寸法のオープンアトラス)」 (CC BY 4.0), adapted. Data sources

  1. Original 19 inch (225/40 R19)

    Alpine A290, 130 and 160 kW · 1 variant

    Both axles
    Tyres
    225/40 R19
    Wheel
    19x8J +30
    Diameter
    662.6 mm

    PCD 5H-114.3 Centre bore 66.1 mm Thread M12x1.5 Fastening type Bolt

    Matching variants (1)

    Variant / grade Model type code Sales period
    Alpine A290, 130 and 160 kW — —

SPECS

Vehicle data and key specifications

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Basics

Sales period
Coming soon

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the A290

Estimated from the registered specifications of first generation / Alpine A290, 130 and 160 kW and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
Check specifications
Weight tax (2 years, standard rate)
Check specifications
Statutory shaken costs (reference)
Enter conditions

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

CATALOG

Catalogue and equipment by grade

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Release date Coming soon

  • Grade A (sample)

    Transmission · drive · engine

    Coming soon
  • Grade B (sample)

    Transmission · drive · engine

    Coming soon
  • Grade C (sample)

    Transmission · drive · engine

    Coming soon

INCH UP

Plus-size guide for the A290 (first generation)

Sizes with a diameter close to the original 225/40 R19 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
20 inch 255/30R20 661.0mm −1.6mm (−0.24%) 39.9km/h 7–9J
225/35R20 665.5mm +2.9mm (+0.44%) 40.2km/h 6–8J
215/35R20 658.5mm −4.1mm (−0.62%) 39.8km/h 6–7.5J
21 inch 215/30R21 662.4mm −0.2mm (−0.03%) 40.0km/h 6–7.5J
255/25R21 660.9mm −1.7mm (−0.26%) 39.9km/h 7–9J
225/30R21 668.4mm +5.8mm (+0.88%) 40.4km/h 6–8J
See more sizes and products in plus-size options →

WINTER TIRES

Smaller wheel options for winter (studless) tyres

A wheel 1 inch smaller than the original 225/40 R19 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.

On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.

FAQ

A290 (first generation) FAQ

Tap a question to show the answer.

What is the original tyre size for the A290 (first generation)?

225/40 R19 on most grades.

What are the original wheel size, PCD and centre bore for the A290 (first generation)?

Original wheel: 19x8J +30, PCD: 5H-114.3, centre bore: 66.1mm, wheel nut/bolt thread: M12x1.5. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.

What is the original wheel offset for the A290 (first generation)?

The original 19x8J +30 wheel has an offset of +30. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).

Which tyre sizes suit the A290 (first generation) for plus sizing?

Sizes with a diameter close to the original (225/40 R19): 20 inch: 255/30R20 (diameter difference −0.2%), 21 inch: 215/30R21 (diameter difference −0.0%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the A290 (first generation) sold, and which grades are listed?

Sold 2024–. 1 variants are listed (1 grades).

TOOLS FOR YOUR CAR

Use the tools with A290 data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

TOP