アウディ R8 スパイダー
original tyre and wheel sizes
Choose your generation to see original sizes by grade and calculate offset and protrusion.
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
Latest generation 4SDMWF (Dec 2019–Oct 2024)
Original 245/30R20 · 20x8.5J +42
See on a cross-section how many mm aftermarket wheels sit further out than the originals and whether they protrude past the fender.
BY GENERATION
Original sizes by generation
6 generations
-
4SDMWF 2019/12–2024/10 Original tyre 245/30R20, 305/30R20 Original wheels Front 20x8.5J +42, Rear 20x11J +50 PCD 5H-112
-
4SDKAF 2017/03–2019/09 Original tyre 245/35R19, 295/35R19 Original wheels Front 19x8.5J +42, Rear 19x11J +50 PCD 5H-112
-
4SCSPF 2017– Original tyre 245/35R19, 295/35R19 Original wheels Not registered PCD Not registered
-
42CTYF 2013/04–2016/03 Original tyre 235/35R19, 295/30R19 Original wheels Front 19x8.5J +42, Rear 19x11J +50 PCD 5H-112
-
42CMPF 2012/04–2013/04 Original tyre 235/35R19, 295/30R19 Original wheels Front 19x8.5J +42, Rear 19x11J +50 PCD 5H-112
-
42BUJF 2010/10–2013/04 Original tyre 235/35R19, 295/30R19 Original wheels Front 19x8.5J +42, Rear 19x11J +50 PCD 5H-112
SIZE GUIDE
R8 スパイダー tyre size guide
Original tyre and wheel sizes for the アウディ R8 スパイダー by generation and grade (6 generations). On the latest 4SDMWF (Dec 2019–Oct 2024), the original tyre is Front 245/30R20, Rear 305/30R20 and the wheel is Front 20x8.5J +42, Rear 20x11J +50.
BY GRADE
4SDMWF original sizes by grade
-
20 inch (245/30R20, 305/30R20)
5 variants
- Front
- 245/30R20 · 20x8.5J +42 Diameter 655.0mm
- Rear
- 305/30R20 · 20x11J +50 Diameter 691.0mm
- Grade
- V10クーペ パフォーマンス 5.2FSI クワトロSトロニック, V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック・2ドア, 2ドア・V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック
INCH UP
If you go up in size
Sizes with a diameter close to the 4SDMWF original 245/30R20. Wheels are calculated with a guide rim width and offset that keep the outer edge close to the original position.
21 inch
-
245/25R21
Diameter +0.9mm · guide 8.5J +42
-
235/25R21
Diameter −4.1mm · guide 8.5J +42
-
255/25R21
Diameter +5.9mm · guide 9J +43
22 inch
-
225/25R22
Diameter +16.3mm · guide 8J +35
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 245/30R20 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
19 inch
245/35R19
Diameter −0.9mm·guide 8.5J +42
-
19 inch
255/35R19
Diameter +6.1mm·guide 9J +43
-
19 inch
225/40R19
Diameter +7.6mm·guide 8J +35
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
R8 スパイダー tyre and wheel FAQ
Tap a question to show the answer.
What tyre size does the R8 スパイダー use?
On the latest 4SDMWF (Dec 2019–Oct 2024), the original tyre on most grades is Front 245/30R20, Rear 305/30R20. Sizes also vary by generation (year); 235/35R19, 295/30R19, 245/35R19, 295/35R19, 245/30R20, 305/30R20 have been used so far.
What are the original wheel size and PCD of the R8 スパイダー?
On the latest 4SDMWF (Dec 2019–Oct 2024), the original wheel is Front 20x8.5J +42, Rear 20x11J +50, the PCD is 5H-112. For aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
Which sizes suit the R8 スパイダー for plus sizing?
To keep the diameter close to the original (245/30R20), the calculated guide is 21 inch: 245/25R21, 22 inch: 225/25R22. On vehicles with different front and rear sizes, compare front and rear separately. A similar diameter does not guarantee fitment. Check load capacity, inflation pressure, approved rim width, the manufacturer's fitment information and clearance on the actual vehicle.
Can the R8 スパイダー use smaller wheels for winter tyres?
At 19 inch, one inch smaller than the original (245/30R20), sizes with a similar diameter are 245/35R19, 255/35R19, 225/40R19. On cars with large brakes (calipers) the wheel may foul them, so check fitment.
How do I choose the offset for aftermarket wheels on the R8 スパイダー?
In Japan, offset is now officially called “inset”. A wider rim than the original, at the same offset, extends half the extra width outwards and half inwards. Reducing the offset by 1 moves the wheel 1 mm outwards. This site's offset calculator shows on a cross-section how many mm the wheel moves out compared with the original and whether it protrudes past the fender.
Tyre basics (load index, date code, tread wear limits and more) →