アウディ
R8 スパイダー4SDMWF Original tyre and wheel sizes and specifications
- 2019/12–2024/10
- オープン・カブリオレ・コンバーチブル
- 5,204cc
- 4WD
- 7AT
- 5 variants
Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.
On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.
STOCK SIZE
Original sizes
Original tyres and wheels used on most grades
Front
Rear
- PCD and studs
- 5H-112
- Centre bore
- Not registered
If you go up in size
Guide sizes that keep the original diameter and place the wheel's outer edge close to the original position (less than 10 mm further inwards). Tap to see the cross-section and protrusion check.
SPECS
Key specifications
- Engine
- DMW 5,204cc
- Max. power
- 620PS
- Vehicle weight
- 1,760kg
- Length × width × height
- 4,430×1,940×1,240mm
- New-car price
- ¥31,460,000–33,370,000 (incl. tax)
The original tyre size for the アウディ R8 スパイダー (4SDMWF, Dec 2019–Oct 2024) is Front 245/30R20, Rear 305/30R20, the wheel size is Front 20x8.5J +42, Rear 20x11J +50 (offset Front +42, Rear +50), the PCD is 5H-112. Battery: LN4.
BY GRADE
Original sizes by grade and year
5 variants · 1 original size
Unverified data extracted from sources (reference values). Sizes may differ by year and variant.
-
Original 20 inch (245/30R20, 305/30R20)
V10クーペ パフォーマンス 5.2FSI クワトロSトロニック, V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック・2ドア, 2ドア・V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック · 5 variants · 2019/12–2024/10
- Front
- Tyres
- 245/30R20
- Wheel
- 20x8.5J +42
- Diameter
- 655.0 mm
- Rear
- Tyres
- 305/30R20
- Wheel
- 20x11J +50
- Diameter
- 691.0 mm
PCD 5H-112 Centre bore Not registered
Matching variants (5)
Variant / grade Model type code Sales period Displacement Seating capacity Fuel Engine / max. power Vehicle weight Battery 4WD・V10クーペ パフォーマンス 5.2FSI クワトロSトロニック・7AT 7BA-4SDMWF 2022/10–2024/10 5,204 cc — — DMW 620PS (456kW)/8000rpm 1,760 kg LN4 V10クーペ パフォーマンス 5.2FSI クワトロSトロニック・4WD・7AT 7BA-4SDMWF 2022/04–2022/10 5,204 cc — — DMW 620PS (456kW)/8000rpm 1,760 kg LN4 V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック・4WD・2ドア・7AT 7BA-4SDMWF 2021/10–2022/04 5,204 cc — — DMW 620PS (456kW)/8000rpm 1,760 kg LN4 4WD・2ドア・V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック・7AT 7BA-4SDMWF 2020/10–2021/10 5,204 cc — — DMW 620PS (456kW)/8000rpm 1,760 kg LN4 4WD・V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック・2ドア・7AT 7BA-4SDMWF 2019/12–2020/10 5,204 cc — — DMW 620PS (456kW)/8000rpm 1,760 kg LN4
BATTERY & FUEL
R8 スパイダー 4SDMWF battery size and fuel economy
For battery replacement and fuel economy reference. Original battery types and catalogue figures.
Battery size
Battery types fitted when new. The cold-climate type applies to cars built for cold regions (or ordered with the cold-climate package).
-
- Standard
- LN4
- Cold-climate spec
- Same as standard
V10クーペ パフォーマンス 5.2FSI クワトロSトロニック (4WD, 7AT), V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック・2ドア (4WD, 7AT), 2ドア・V10クーペ パフォーマンス 5.2FSI クワトロ Sトロニック (4WD, 7AT) etc. (5 variants)
Idle-stop and hybrid vehicles need dedicated batteries. Before replacing, also check the label on the battery currently fitted. The “Search on …” links open each online shop's search results for the battery type in a new window.
SPECS
R8 スパイダー 4SDMWF specifications
Basics
- Sales period
- 2019/12–2024/10
- Model code
- 7BA-4SDMWF
- Body type
- オープン・カブリオレ・コンバーチブル
- Drive
- 4WD
- Transmission
- 7AT
- New-car price
- ¥31,460,000〜¥33,370,000
Engine and fuel economy
- Engine code
- DMW
- Engine
- V型10気筒DOHC40バルブ
- Displacement
- 5,204cc
- Max. power
- 620PS
- Max. torque
- 580N·m
Dimensions and weight
- Length × width × height
- 4,430×1,940×1,240mm
- Wheelbase
- 2,650mm
- Track front / rear
- 1,645mm / 1,605mm
- Vehicle weight
- 1,760kg
Suspension
- Suspension front / rear
- ダブルウィッシュボーン
- Brakes front / rear
- ベンチレーテッドディスク
Figures are ranges across the listed variants. Fuel economy is the catalogue figure (test cycle); new-car prices include tax.
TAX & INSPECTION
Estimated tax and shaken (vehicle inspection) costs for the R8 スパイダー
Estimated from the registered specifications of 4SDMWF / V10クーペ パフォーマンス 5.2FSI クワトロSトロニック (4WD, 7AT) and the assumptions below.
These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.
- Automobile tax (annual)
- Check specifications
- Weight tax (2 years, standard rate)
- ¥32,800
- Statutory shaken costs (reference)
- ¥53,460
Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.
Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.
Calculate tax and shaken costs for this specification →Catalogue by grade
Loading…
INCH UP
Plus-size guide for the R8 スパイダー (4SDMWF)
Sizes with a diameter close to the original 245/30R20 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.
| Diameter (in) | Tyre size | Diameter | Difference from original | Actual speed at indicated 40 km/h | Rim width guide |
|---|---|---|---|---|---|
| 21 inch | 245/25R21 | 655.9mm | +0.9mm (+0.14%) | 40.1km/h | 7–8.5J |
| 235/25R21 | 650.9mm | −4.1mm (−0.63%) | 39.7km/h | 6.5–8.5J | |
| 255/25R21 | 660.9mm | +5.9mm (+0.90%) | 40.4km/h | 7–9J | |
| 22 inch | 225/25R22 | 671.3mm | +16.3mm (+2.49%) | 41.0km/h | 6–8J |
WINTER TIRES
Smaller wheel options for winter (studless) tyres
A wheel 1 inch smaller than the original 245/30R20 makes the tyre and wheel set cheaper and lets you choose a taller-sidewall tyre that is easier to handle on snow. These sizes have a diameter close to the original.
-
19 inch
245/35R19
Diameter −0.9mm·guide 8.5J +42
-
19 inch
255/35R19
Diameter +6.1mm·guide 9J +43
-
19 inch
225/40R19
Diameter +7.6mm·guide 8J +35
On vehicles with large brake calipers, a smaller wheel may hit the brakes and not fit. When choosing wheels, check fitment for your vehicle with the retailer. “Calculate” shows the change in rim position from the entered dimensions; it cannot calculate the actual brake clearance. Also check load capacity, approved rim width and product availability. For vehicles with different front and rear sizes, check whether the reference size is front or rear and check the front/rear combination separately.
FAQ
R8 スパイダー (4SDMWF) FAQ
Tap a question to show the answer.
What is the original tyre size for the R8 スパイダー (4SDMWF)?
Front 245/30R20, Rear 305/30R20 on most grades.
What are the original wheel size, PCD and centre bore for the R8 スパイダー (4SDMWF)?
Original wheel: Front 20x8.5J +42, Rear 20x11J +50, PCD: 5H-112. When choosing aftermarket wheels, match the PCD, stud count and centre bore, then also check the nut/bolt specification and brake clearance. Matching dimensions alone does not confirm fitment.
What is the original wheel offset for the R8 スパイダー (4SDMWF)?
The original Front 20x8.5J +42, Rear 20x11J +50 wheel has an offset of Front +42, Rear +50. In Japan, offset is now officially called “inset”; it is also written as “ET45”, for example. Reducing the offset by 1 moves the wheel 1 mm outwards (with the same rim width).
Which tyre sizes suit the R8 スパイダー (4SDMWF) for plus sizing?
Sizes with a diameter close to the original (245/30R20): 21 inch: 245/25R21 (diameter difference +0.1%), 22 inch: 225/25R22 (diameter difference +2.5%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.
What battery size does the R8 スパイダー (4SDMWF) use?
Standard: LN4. When replacing it, also check the type of the battery currently fitted (for example, whether it is for idle-stop or hybrid vehicles).
What are the body dimensions (width) and weight of the R8 スパイダー (4SDMWF)?
Length 4,430mm, width 1,940mm, height 1,240mm, vehicle weight 1,760kg. Vehicle weight is a guide when choosing the tyre load index.
When was the R8 スパイダー (4SDMWF) sold, and which grades are listed?
Sold Dec 2019–Oct 2024. 5 variants are listed (3 grades), drive: 4WD, transmission: 7AT.
TOOLS FOR YOUR CAR
Use the tools with R8 スパイダー data
Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.
OTHER MODELS