Skip to main content
Coupe illustration

フェラーリ

F12ベルリネッタF152 Original tyre and wheel sizes, with offset calculator

  • 2012–
  • 3 variants
Change vehicle

Values shown are the original specifications registered for the new vehicle.They may differ from the sizes currently fitted. Choose the model code, year and grade, and compare with the tyre sidewall, wheel markings and the vehicle's specification.

On vehicles with different front and rear sizes, check the front and rear wheels separately.Don't treat a candidate for one axle as a recommendation for all four wheels. Check the front/rear combination, load capacity and pressure, mounting specification and the product's fitment information.

STOCK SIZE

Original sizes

Original tyres and wheels used on most grades

Front

Tyres
255/35ZR20
Diameter 686.5mm
Tyre list 31 models

Rear

Tyres
315/35ZR20
Diameter 728.5mm
Tyre list 20 models
PCD and studs
Not registered
Centre bore
Not registered

SPECS

Key specifications

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Engine
Coming soon
Max. power
Coming soon
Vehicle weight
Coming soon
Length × width × height
Coming soon
Seating capacity
Coming soon
New-car price
Coming soon

The original tyre size for the フェラーリ F12ベルリネッタ (F152, 2012–) is Front 255/35ZR20, Rear 315/35ZR20.

BY GRADE

Original sizes by grade and year

3 variants · 1 original size

Unverified data extracted from sources (reference values). Sizes may differ by year and variant.

  1. Original 20 inch (255/35ZR20, 315/35ZR20)

    ベースグレード · 3 variants · 2012/07–

    Front
    Tyres
    255/35ZR20
    Wheel
    20 inch Rim width and offset not registered
    Diameter
    686.5 mm
    Rear
    Tyres
    315/35ZR20
    Wheel
    20 inch Rim width and offset not registered
    Diameter
    728.5 mm

    PCD Not registered Centre bore Not registered

    Matching variants (3)

    Variant / grade Model type code Sales period
    ベースグレード 7AT ABA-F152 2014/04–
    ベースグレード 7AT ABA-F152 2013/09–
    ベースグレード 7AT ABA-F152 2012/07–

SPECS

Vehicle data and key specifications

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Basics

Sales period
Coming soon
Model code
Coming soon
Body type
Coming soon
Drive
Coming soon
Transmission
Coming soon
Seating capacity
Coming soon
New-car price
Coming soon

Engine and fuel economy

Engine
Coming soon
Displacement
Coming soon
Max. power
Coming soon
Max. torque
Coming soon
Fuel
Coming soon

Dimensions and weight

Length × width × height
Coming soon
Wheelbase
Coming soon
Track front / rear
Coming soon
Vehicle weight
Coming soon

Suspension

Suspension front / rear
Coming soon
Brakes front / rear
Coming soon

TAX & INSPECTION

Estimated tax and shaken (vehicle inspection) costs for the F12ベルリネッタ

Estimated from the registered specifications of F152 / ベースグレード (2WD, 7AT) and the assumptions below.

These are reference amounts before checking the vehicle's registration details.First-registration date, vehicle age and relief category are not determined from the sales period or model code. Older vehicles are also shown under the common conditions below. Check the shaken certificate (Japan's vehicle inspection certificate) and change the conditions in the calculator to match your vehicle.

Automobile tax (annual)
¥110,000
Weight tax (2 years, standard rate)
¥32,800
Statutory shaken costs (reference)
¥53,460

Assumptions: First registered October 2019 or later; private passenger car under 13 years old with no weight-tax relief. Compulsory insurance is 24 months on the mainland starting from November 2026; inspection fees assume an over-the-counter application at a designated garage. Servicing and agency fees are not included. Rules and rates checked: 14 November 2026.

Check the first-registration date and weight-tax category in the shaken certificate (Japan's vehicle inspection certificate) or similar records.

Calculate tax and shaken costs for this specification →

CATALOG

Catalogue and equipment by grade

Coming soonNot yet available in standard mode. The items below are placeholders, not data for this vehicle.

Release date Coming soon

  • Grade A (sample)

    Transmission · drive · engine

    Coming soon
  • Grade B (sample)

    Transmission · drive · engine

    Coming soon
  • Grade C (sample)

    Transmission · drive · engine

    Coming soon

INCH UP

Plus-size guide for the F12ベルリネッタ (F152)

Sizes with a diameter close to the original 255/35ZR20 (smallest difference first). Whether they fit depends on rim width, offset and fender clearance.

Diameter (in) Tyre size Diameter Difference from original Actual speed at indicated 40 km/h Rim width guide
21 inch 255/30R21 686.4mm −0.1mm (−0.01%) 40.0km/h 7–9J
265/30R21 692.4mm +5.9mm (+0.86%) 40.3km/h 7.5–9.5J
245/30R21 680.4mm −6.1mm (−0.89%) 39.6km/h 7–8.5J
22 inch 255/25R22 686.3mm −0.2mm (−0.03%) 40.0km/h 7–9J
265/25R22 691.3mm +4.8mm (+0.70%) 40.3km/h 7.5–9.5J
245/25R22 681.3mm −5.2mm (−0.76%) 39.7km/h 7–8.5J
See more sizes and products in plus-size options →

FAQ

F12ベルリネッタ (F152) FAQ

Tap a question to show the answer.

What is the original tyre size for the F12ベルリネッタ (F152)?

Front 255/35ZR20, Rear 315/35ZR20 on most grades.

Which tyre sizes suit the F12ベルリネッタ (F152) for plus sizing?

Sizes with a diameter close to the original (255/35ZR20): 21 inch: 255/30R21 (diameter difference −0.0%), 22 inch: 255/25R22 (diameter difference −0.0%). These options compare the diameter of the reference tyre shown and are not a recommendation for a full front-and-rear set. On vehicles with different front and rear sizes, check front and rear separately. Check load capacity, inflation pressure, approved rim width and the manufacturer's fitment information, and check clearance on the actual vehicle. The offset calculator compares the change in position caused by the dimensions.

When was the F12ベルリネッタ (F152) sold, and which grades are listed?

Sold 2012–. 3 variants are listed (1 grades).

TOOLS FOR YOUR CAR

Use the tools with F12ベルリネッタ data

Registered data such as weight, power and original sizes are carried over. You can change the grade within each tool.

TOP