Calculates static and dynamic compression ratios, boost-equivalent ratio and the volume needed for a target ratio. Change intake valve closing and more under additional settings.
Shows an SVG cross-section of the cylinder and piston; use the crank-angle slider or play/pause to see the motion.
Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
2vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.
SETTINGS
Adjust inputs
Engine dimensions and volumes
Gasket and deck
Dynamic compression, boost and target ratio
03
Diagram and results
Updating…
Static compression ratio (:1)9.74
Dynamic compression ratio (:1)8.09
TDC clearance volume (cc)57.13
LIVE SIMULATIONInputs update the diagram
Cylinder and piston / ENGINE SECTION
A schematic of piston travel between top and bottom dead centre. Dimensional inputs update the section.
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.
Static compression ratio = (swept volume + TDC clearance volume) ÷ clearance volume. Dynamic compression uses an effective stroke derived from con-rod length and intake closing. Compression pressure is a polytropic estimate of gauge pressure.
Boost
Boost-equivalent ratio = static compression ratio × absolute intake pressure ÷ atmospheric pressure. It does not predict knock limits or measured compression pressure.