Skip to main content

COMPRESSION

Compression Ratio Calculator

What this calculator can do

  • Calculates static and dynamic compression ratios, boost-equivalent ratio and the volume needed for a target ratio. Change intake valve closing and more under additional settings.
  • Shows an SVG cross-section of the cylinder and piston; use the crank-angle slider or play/pause to see the motion.
Minivan illustration
Vehicle · shared by all tools

シボレー シボレーMW ME63S

Sエディション (2WD, 4AT) 2000/09–

Clear vehicle

Linked in this tool: Bore (mm), Stroke (mm)

Calculate offset for this vehicle →

Select country → manufacturer → model → model code/years → grade.

Search directly by model name or model code

Vehicles without registered tyre and wheel data can also be selected.

Apply this vehicle →

Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.

2vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.

SETTINGS

Adjust inputs

Engine dimensions and volumes

Gasket and deck

Dynamic compression, boost and target ratio

03

Diagram and results

Updating…
Static compression ratio (:1)5.36
Dynamic compression ratio (:1)4.47
TDC clearance volume (cc)57.13
LIVE SIMULATIONInputs update the diagram
Cylinder and piston / ENGINE SECTION
Combustion chamber 45 cc Bore 68.0 mm Stroke68.6 mm

A schematic of piston travel between top and bottom dead centre. Dimensional inputs update the section.

Static compression ratio5.36 : 1→Dynamic compression ratio4.47 : 1
All calculation results 10 items
Static compression ratio (:1)
5.361
Dynamic compression ratio (:1)
4.469
Swept volume per cylinder (cc)
249.133
TDC clearance volume (cc)
57.134
Effective stroke (mm)
54.569
Estimated cranking pressure (gauge, bar)
5.095
Boost-equivalent ratio (:1)
5.361
Clearance volume for target ratio (cc)
27.681
Required volume change (+ = increase, cc)
-29.452
Piston volume for target ratio (cc)
-24.452
Save and share these calculation inputs

Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.

Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.

How to use and assumptions
Formula
Static compression ratio = (swept volume + TDC clearance volume) ÷ clearance volume. Dynamic compression uses an effective stroke derived from con-rod length and intake closing. Compression pressure is a polytropic estimate of gauge pressure.
Boost
Boost-equivalent ratio = static compression ratio × absolute intake pressure ÷ atmospheric pressure. It does not predict knock limits or measured compression pressure.

View original sizes and grades for the シボレー シボレーMW ME63S →

TOP