Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
8vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.
SETTINGS
Adjust inputs
RPM, tyre diameter and final drive
50012000
Individual gear ratios
Tyre change, gear teeth and crawl ratio
Diagram and results
Updating…
Gear 1: speed at entered RPM (km/h)27
Gear 1: RPM at entered road speed (rpm)11,313
Equivalent final drive after tyre change (:1)3.09
LIVE SIMULATIONInputs update the diagram
Engine speed and road speed by gear
Gear 1Gear 2Gear 3Gear 4Gear 5Gear 6
All calculation results 15 items
Gear 1: speed at entered RPM (km/h)
26.517
Gear 1: RPM at entered road speed (rpm)
11,313.461
Gear 2: speed at entered RPM (km/h)
47.373
Gear 2: RPM at entered road speed (rpm)
6,332.755
Gear 3: speed at entered RPM (km/h)
72.758
Gear 3: RPM at entered road speed (rpm)
4,123.250
Gear 4: speed at entered RPM (km/h)
98.135
Gear 4: RPM at entered road speed (rpm)
3,057.020
Gear 5: speed at entered RPM (km/h)
120.706
Gear 5: RPM at entered road speed (rpm)
2,485.382
Gear 6: speed at entered RPM (km/h)
145.429
Gear 6: RPM at entered road speed (rpm)
2,062.867
Ratio from tooth counts (:1)
2.000
Equivalent final drive after tyre change (:1)
3.092
Crawl ratio (:1)
14.007
Save and share these calculation inputs
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.
Road speed = RPM × tyre circumference × 60 ÷ total reduction ÷ 1,000,000. Tyre deflection and slip are excluded. Enter integer tooth counts. The equivalent final drive preserves RPM at the same road speed; it is not a parts recommendation.
Reading road speed and RPM from gear and final-drive ratios
Overall reduction is each gear ratio × the final-drive ratio. With the same tyre diameter and RPM, a larger overall reduction gives a lower road speed. Speed and RPM for each gear use the current tyre diameter; the new tyre diameter is used only for the equivalent final drive.
Example: 630 mm tyre, 4th gear 1.000, final drive 4.100
At 3,000 RPM the road speed is about 86.9 km/h, and about 3,453 RPM is needed for 100 km/h. With a 660 mm tyre, the final drive that gives the same RPM at the same speed is 4.100 × 660 ÷ 630 ≈ 4.295. The ‘equivalent final drive’ in the results is this converted value, not a recommendation for which part to choose.
What if the vehicle's gear ratios are not registered?
The initial values are an example. Match model code, year, grade and transmission against the manufacturer's specifications or service data, then enter each gear and the final drive. Selecting a vehicle leaves unregistered values as examples. Do not treat a CVT's ratio range as six fixed gears.
How are staggered sizes and real-world differences handled?
With staggered sizes, use the driven wheels' diameter. For four-wheel-drive vehicles, also check the manufacturer's limit on front–rear circumference difference. The calculation uses nominal diameter × π and excludes deflection under load, wear, tyre slip and torque-converter slip.