GEARING
Gear Ratio Calculator
Calculate RPM and road speed for up to six gears, tooth ratios and the equivalent final-drive ratio after a tyre-diameter change.
マセラティ グランカブリオ MGC
ベースグレード (2WD, 6AT) 2016/01–
Linked in this tool: Current tyre diameter (mm)
Calculate offset for this vehicle →Select country → manufacturer → model → model code/years → grade.
Search directly by model name or model code
Vehicles without registered tyre and wheel data can also be selected.
Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
1vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.
Adjust inputs
RPM, tyre diameter and final drive
Individual gear ratios
Tyre change, gear teeth and crawl ratio
Diagram and results
Updating…All calculation results 15 items
- Gear 1: speed at entered RPM (km/h)
- 26.777
- Gear 1: RPM at entered road speed (rpm)
- 11,203.696
- Gear 2: speed at entered RPM (km/h)
- 44.628
- Gear 2: RPM at entered road speed (rpm)
- 6,722.218
- Gear 3: speed at entered RPM (km/h)
- 62.479
- Gear 3: RPM at entered road speed (rpm)
- 4,801.584
- Gear 4: speed at entered RPM (km/h)
- 93.719
- Gear 4: RPM at entered road speed (rpm)
- 3,201.056
- Gear 5: speed at entered RPM (km/h)
- 110.258
- Gear 5: RPM at entered road speed (rpm)
- 2,720.898
- Gear 6: speed at entered RPM (km/h)
- 133.884
- Gear 6: RPM at entered road speed (rpm)
- 2,240.739
- Ratio from tooth counts (:1)
- 2.000
- Equivalent final drive after tyre change (:1)
- 3.982
- Crawl ratio (:1)
- 14.350
Save and share these calculation inputs
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
How to use and assumptions
- Formula
- Road speed = RPM × tyre circumference × 60 ÷ total reduction ÷ 1,000,000. Tyre deflection and slip are excluded. Enter integer tooth counts. The equivalent final drive preserves RPM at the same road speed; it is not a parts recommendation.
Reading road speed and RPM from gear and final-drive ratios
Overall reduction is each gear ratio × the final-drive ratio. With the same tyre diameter and RPM, a larger overall reduction gives a lower road speed. Speed and RPM for each gear use the current tyre diameter; the new tyre diameter is used only for the equivalent final drive.
Example: 630 mm tyre, 4th gear 1.000, final drive 4.100
At 3,000 RPM the road speed is about 86.9 km/h, and about 3,453 RPM is needed for 100 km/h. With a 660 mm tyre, the final drive that gives the same RPM at the same speed is 4.100 × 660 ÷ 630 ≈ 4.295. The ‘equivalent final drive’ in the results is this converted value, not a recommendation for which part to choose.
What if the vehicle's gear ratios are not registered?
The initial values are an example. Match model code, year, grade and transmission against the manufacturer's specifications or service data, then enter each gear and the final drive. Selecting a vehicle leaves unregistered values as examples. Do not treat a CVT's ratio range as six fixed gears.
How are staggered sizes and real-world differences handled?
With staggered sizes, use the driven wheels' diameter. For four-wheel-drive vehicles, also check the manufacturer's limit on front–rear circumference difference. The calculation uses nominal diameter × π and excludes deflection under load, wear, tyre slip and torque-converter slip.
View original sizes and grades for the マセラティ グランカブリオ MGC →