Skip to main content

INJECTOR

Injector Size Calculator

Calculate required flow, supported power, duty cycle and flow after a fuel-pressure change.

Minivan illustration
Vehicle · shared by all tools

ホンダ エリシオン RR3

VG AERO HDDナビスマートセレクション (2WD) 2010/05–2010/11

Clear vehicle

Linked in this tool: Target engine power (hp)

Calculate offset for this vehicle →

Select country → manufacturer → model → model code/years → grade.

Search directly by model name or model code

Vehicles without registered tyre and wheel data can also be selected.

Apply this vehicle →

Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.

1vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.

SETTINGS

Adjust inputs

Target power and injectors

10100

Fuel properties

Fuel-pressure change simulation

Diagram and results

Updating…
Required flow per injector (cc/min)469.48
Supported power with current injectors (hp)289.07
Required duty cycle at target power (%)68.29
LIVE SIMULATIONInputs update the diagram
Fuel pressure and injector flow
0 0.0 214 1.5 428 3.0 642 4.5 856 6.0 Flow (cc/min)Differential pressure (bar)
Flow (same fuel, by differential pressure)Flow required for target power
Required duty cycle 68.3%
Limit 80% / right edge = 100%
All calculation results 7 items
Required flow per injector (cc/min)
469.476
Required flow per injector (lb/hr)
46.265
Current flow (lb/hr)
54.201
Supported power with current injectors (hp)
289.070
Required duty cycle at target power (%)
68.287
Flow after pressure change (cc/min)
635.085
Supported power after pressure change (hp)
333.789
Save and share these calculation inputs

Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.

Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.

How to use and assumptions
Formula
Required flow (lb/h) = target hp × BSFC ÷ injector count ÷ duty cycle, converted to cc/min using fuel density. New flow = old flow × √(new pressure ÷ old pressure).
Input notes
Power is crankshaft hp. Fuel pressure is the difference between rail pressure and manifold pressure. Enter BSFC and density for your fuel and operating conditions.

Injector Dynamics: fuel flow and differential pressure →

View original sizes and grades for the ホンダ エリシオン RR3 →

TOP