Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
1vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.
SETTINGS
Adjust inputs
Target power and injectors
10100
Fuel properties
Fuel-pressure change simulation
Diagram and results
Updating…
Required flow per injector (cc/min)221.98
Supported power with current injectors (hp)289.07
Required duty cycle at target power (%)32.29
LIVE SIMULATIONInputs update the diagram
Fuel pressure and injector flow
Flow (same fuel, by differential pressure)Flow required for target power
Required duty cycle 32.3%
Limit 80% / right edge = 100%
All calculation results 7 items
Required flow per injector (cc/min)
221.980
Required flow per injector (lb/hr)
21.875
Current flow (lb/hr)
54.201
Supported power with current injectors (hp)
289.070
Required duty cycle at target power (%)
32.288
Flow after pressure change (cc/min)
635.085
Supported power after pressure change (hp)
333.789
Save and share these calculation inputs
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.
Required flow (lb/h) = target hp × BSFC ÷ injector count ÷ duty cycle, converted to cc/min using fuel density. New flow = old flow × √(new pressure ÷ old pressure).
Input notes
Power is crankshaft hp. Fuel pressure is the difference between rail pressure and manifold pressure. Enter BSFC and density for your fuel and operating conditions.