INJECTOR
Injector Size Calculator
Calculate required flow, supported power, duty cycle and flow after a fuel-pressure change.
BMW M2 1H30
ベースグレード (2WD, 7AT) 2017/04–2017/08
Linked in this tool: Target engine power (hp), Number of injectors
Calculate offset for this vehicle →Select country → manufacturer → model → model code/years → grade.
Search directly by model name or model code
Vehicles without registered tyre and wheel data can also be selected.
Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
2vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.
The initial injector count is based on registered cylinder count. Verify actual injector numbers, including combined direct and port injection systems.
Adjust inputs
Target power and injectors
Fuel properties
Fuel-pressure change simulation
Diagram and results
Updating…All calculation results 7 items
- Required flow per injector (cc/min)
- 462.672
- Required flow per injector (lb/hr)
- 45.595
- Current flow (lb/hr)
- 54.201
- Supported power with current injectors (hp)
- 433.605
- Required duty cycle at target power (%)
- 67.298
- Flow after pressure change (cc/min)
- 635.085
- Supported power after pressure change (hp)
- 500.684
Save and share these calculation inputs
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
How to use and assumptions
- Formula
- Required flow (lb/h) = target hp × BSFC ÷ injector count ÷ duty cycle, converted to cc/min using fuel density. New flow = old flow × √(new pressure ÷ old pressure).
- Input notes
- Power is crankshaft hp. Fuel pressure is the difference between rail pressure and manifold pressure. Enter BSFC and density for your fuel and operating conditions.
View original sizes and grades for the BMW M2 1H30 →