Skip to main content

DRIVELINE

Pinion Angle Calculator

What this calculator can do

  • Switch between single cardan, front double cardan and two-piece shafts, and calculate each joint's operating angle from signed shaft inclinations.
  • An SVG side view that follows your inputs shows the positions of shafts and joints. It compares angles in a single plane and does not predict actual vibration.
Hatchback illustration
Vehicle · shared by all tools

マツダ デミオ DEJFS

13-スカイアクティブ (2WD, CVT) 2014/04–2014/09

Clear vehicle

No specifications for this tool are registered. The vehicle selection is kept; enter the conditions manually.

Calculate offset for this vehicle →

Select country → manufacturer → model → model code/years → grade.

Search directly by model name or model code

Vehicles without registered tyre and wheel data can also be selected.

Apply this vehicle →

Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.

0vehicle reference inputs loaded. Other fields retain example values; adjust them to the vehicle.

SETTINGS

Adjust inputs

Shaft layout and inclinations

-2020

-2020

-2020

Diagram and results

Updating…
Front joint operating angle (°)2.00
Rear joint operating angle (°)2.00
Front–rear operating angle difference (°)0.00
LIVE SIMULATIONInputs update the diagram
Axles and joints / SIDE VIEW
TransmissionPropeller shaftPinion Front 2.00°Rear 2.00° Positive inclination rises towards the rear
All calculation results 4 items
Front joint operating angle (°)
2.000
Rear joint operating angle (°)
2.000
Front–rear operating angle difference (°)
0.000
Target pinion angle for parallel layout (°)
-3.000
Save and share these calculation inputs

Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.

Select and copy the URL. A shared link does not verify fitment or the accuracy of the inputs.

How to use and assumptions
Measurement direction
Enter every angle in the same front-to-rear coordinate system, with upward towards the rear as positive. If you measured the pinion flange face, convert it to the shaft-axis angle.
Assumptions
Angles are compared in a single plane, excluding lateral offset and axle wrap under load. Two-piece shafts show three joint angles. Operating angles alone cannot confirm whether vibration will occur.

Spicer: checking driveline operating angles →

View original sizes and grades for the マツダ デミオ DEJFS →

TOP