SPRING FREQUENCY
Spring Rate & Ride Frequency Calculator
Compare ride frequency and wheel rate from spring rate, sprung mass per wheel and motion ratio. Calculate the spring rate for a comparison frequency.
Adjust inputs
Spring rate and wheel conditions
View results
Updating…Spring rate and ride frequency
Sprung mass and motion ratio are held constant. Input changes update the curve, scale and comparison markers.
Sprung mass 300.0 kg / motion ratio 1.00
| Condition | Spring rate (kgf/mm) | Ride Frequency (Hz) |
|---|---|---|
| ○ Current | 8.00 | 2.57 |
| □ Comparison | 10.00 | 2.88 |
| ◇ Target | 4.83 | 2.00 |
The target is a comparison, not a recommendation. This plot does not reproduce actual vehicle motion or ride comfort.
Compare sprung mass per wheel and spring stiffness
Sprung mass is the mass supported by the spring at one wheel: corner mass minus unsprung mass such as the wheel and tyre. Do not simply divide total vehicle mass by four.
Motion ratio here means wheel travel ÷ spring compression. Invert a reference that uses the opposite definition. Tyre stiffness and damping are excluded; the model does not reproduce actual vehicle motion or comfort.
Initial values and target frequency are comparison examples. A calculated rate does not establish product suitability, ride comfort or fitment.
All calculation results 6 items
- Sprung-mass ride frequency (Hz)
- 2.574
- Wheel rate (N/mm)
- 78.453
- Spring rate for target frequency (kgf/mm)
- 4.831
- Spring rate for target frequency (N/mm)
- 47.374
- Comparison spring ride frequency (Hz)
- 2.878
- Static deflection at the wheel (mm)
- 37.500
Save and share these calculation inputs
Copy the URL to share or bookmark these conditions. Inputs are also retained in this browser after changes, separately for each tool and vehicle. URL parameters take priority.
How to use and assumptions
- Formula and units
- Wheel rate kw = spring rate ks / motion ratio². Ride frequency f = √(kw × 1000 / sprung mass) / (2π). Rates are N/mm, mass is kg and frequency is Hz. 1 kgf/mm = 9.80665 N/mm. Inverse: ks = (2πf)² × mass / 1000 × motion ratio².
- Mass and motion ratio
- Use measured corner mass minus unsprung mass. Vehicle mass divided by four is not filled automatically. Motion ratio is vertical wheel travel divided by actual spring compression near static ride height. Use a measured ratio including installation-angle effects; do not apply angle correction twice.
- Model limits
- This single-degree-of-freedom model uses a linear spring and constant motion ratio. It excludes damping, tyre stiffness, anti-roll bars, bump stops, unsprung vibration and front/rear coupling. Static deflection is wheel-side displacement in the model, not a ride-height change or remaining damper travel.
Formulas and units checked: 15 November 2026. Because references define motion ratio in different directions, this page always uses wheel travel ÷ spring compression.
Eibach・Suspension WorksheetJönköping University: frequency and motion ratio
Ride-frequency example and checking your inputs
Example: 8 kgf/mm, 300 kg sprung mass, motion ratio 1
The spring rate is 78.45 N/mm, the wheel rate is also 78.45 N/mm, and the ride frequency is about 2.57 Hz. With 10 kgf/mm and the same mass and ratio, it becomes about 2.88 Hz. This is a fixed-condition comparison, not a recommended rate or frequency for any vehicle.
Is sprung mass per wheel a quarter of the vehicle weight?
Weight is not necessarily distributed evenly. Use a measured corner weight minus that wheel's unsprung mass. Because vehicle weight alone cannot determine it, this calculator does not fill it in from vehicle data.
Can I enter the inverse motion ratio?
This page uses wheel travel ÷ spring compression. If the wheel moves 10 mm and the spring compresses 8 mm near static ride height, the ratio is 1.25. If a reference gives spring compression ÷ wheel travel = 0.8, invert it. Use a measured ratio that already includes angle effects, and do not correct for the angle twice.
Does a higher frequency mean better ride or handling?
This value alone cannot tell you. It is a simple model with a constant motion ratio and linear spring, excluding damping, tyre stiffness, anti-roll bars, bump stops and front–rear coupling. Static deflection is also distinct from ride-height change or remaining stroke.
View original sizes and grades for the フェラーリ 599 F599 →