Honda · 2016-2024
フリード(GB5〜GB8)
DBA-GB5
108 N·m
Model-specific listed value (reference)
- Thread:
- M12×1.5
- HEX:
- 19 mm
- Seat:
- Varies with wheel specification; check
TorqueSpec
Search wheel tightening torque, thread size and seat type by model and model code.
G (2WD, CVT) 2023/04–
Linked in this tool: Tightening torque, Thread
Calculate offset for this vehicle →Select country → manufacturer → model → model code/years → grade.
Vehicles without registered tyre and wheel data can also be selected.
Registered specifications and reference data matching the model code are linked. Check first-registration date, measured values and unregistered items against your own vehicle.
G (2WD, CVT) 2023/04–
≈ 11.01 kgf·m / 79.7 lb·ft
Model-specific referenceUsing Honda's general reference values.They fill in items without model-specific values. As they are not model-specific specifications, check the year and original-wheel conditions in the owner's manual.
Model-specific reference values matching this model code. Check the applicable years and specification in the owner's manual. Where several hex sizes are listed or the seat varies with the wheel, check the actual vehicle.
DBA-GB5 · 2016-2024 Source document · Seat type varies with the wheel specification.
N·m
/ HEX
Seat:
The selected vehicle's seat type is highlighted. Nothing is highlighted if it is unregistered or varies by specification. Different seat shapes are not interchangeable.
1 entries. Registered values, verified documents and model-code references take priority; missing items show the manufacturer's general reference values. Where no value applies, ‘Check’ is shown.
| Model, model code and years | Reference torque | Thread | Hex size | Seat and fastening | Sources and vehicle |
|---|---|---|---|---|---|
| ホンダフリード プラスGB52016/09–present | 108 N·mModel-specific reference | M12×1.5Model-specific reference | 19 mmModel-specific reference | Check requiredVaries with wheel specificationNut | View vehicle and grades → |
General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.
| Manufacturer | Thread size | HEX | Original seat | Reference torque | Reference range |
|---|---|---|---|---|---|
| Toyota | M12×1.5 | 21 mm | Flat (with washer) | 103 N·m | 100–110 N·mTypical ≈ 10.5 kgf·m |
| LexusBOLT | M14×1.5 | 17 mm | 60° taper | 140 N·m | 140–140 N·mTypical ≈ 14.3 kgf·m |
| Nissan | M12×1.25 | 21 mm | 60° taper | 108 N·m | 98–118 N·mTypical ≈ 11.0 kgf·m |
| Honda | M12×1.5 | 19 mm | Spherical (R12/R13) | 108 N·m | 98–118 N·mTypical ≈ 11.0 kgf·m |
| Mazda | M12×1.5 | 21 mm | 60° taper | 108 N·m | 88–118 N·mTypical ≈ 11.0 kgf·m |
| Subaru | M12×1.25 | 19 mm | 60° taper | 120 N·m | 100–120 N·mTypical ≈ 12.2 kgf·m |
| Mitsubishi | M12×1.5 | 21 mm | 60° taper | 98 N·m | 88–108 N·mTypical ≈ 10.0 kgf·m |
| Suzuki | M12×1.25 | 17 / 19 mm | 60° taper | 85 N·m | 70–100 N·mTypical ≈ 8.7 kgf·m |
| Daihatsu | M12×1.5 | 19 / 21 mm | 60° taper | 103 N·m | 90–110 N·mTypical ≈ 10.5 kgf·m |
General reference values by manufacturer. Specifications vary by year, model and original wheel. Always check the specified value in the vehicle's owner's manual.
| Manufacturer | Thread size | HEX | Original seat | Reference torque | Reference range |
|---|---|---|---|---|---|
| Volkswagen / AudiBOLT | M14×1.5 | 17 mm | Spherical (R12/R13) | 120 N·m | 110–140 N·mTypical ≈ 12.2 kgf·m |
| BMW / MINIBOLT | M14×1.25 | 17 mm | 60° taper | 140 N·m | 120–140 N·mTypical ≈ 14.3 kgf·m |
| Mercedes-BenzBOLT | M14×1.5 | 17 mm | Spherical (R12/R13) | 130 N·m | 110–150 N·mTypical ≈ 13.3 kgf·m |
| VolvoBOLT | M14×1.5 | 19 mm | 60° taper | 140 N·m | 120–140 N·mTypical ≈ 14.3 kgf·m |
| PorscheBOLT | M14×1.5 | 19 mm | Spherical (R12/R13) | 160 N·m | 130–160 N·mTypical ≈ 16.3 kgf·m |
| Thread size | HEX | Main manufacturers |
|---|---|---|
| M12×1.25 | 17 / 19 / 21 mm | Nissan, Subaru, Suzuki, etc. |
| M12×1.5 | 19 / 21 mm | Toyota, Honda, Mazda, Mitsubishi, Daihatsu, etc. |
| M14×1.5 | 17 / 19 / 21 / 22 mm | European cars, large SUVs, commercial vehicles, etc. |
| M14×1.25 | 17 mm | BMW / MINI (recent models) |
| M14×2.0 | 19 / 21 / 22 mm | Some US vehicles |
1 of 105 entries match the search. These are reference values for representative specifications by model and model code. Check the applicable years and the actual vehicle. Rows showing manufacturer general values are distinguished from model-specific values.
Honda · 2016-2024
DBA-GB5
108 N·m
Model-specific listed value (reference)
M12×1.5 means a 12 mm nominal diameter and 1.5 mm pitch. It is not interchangeable with M12×1.25 or M14 threads. Hex size is the socket size. Match the 60° taper, spherical or flat seat to the shape the wheel specifies.
Tighten in a star pattern over several passes, then confirm the torque specified in the owner's manual with a torque wrench. Follow the manufacturer's instructions on lubrication and re-checking.
Torque unit conversion and wrench correction →View original sizes and grades for the ホンダ フリード プラス GB5 →